IDRVSLO
Goblin Guru
I think I will do what Dan Perry did and just tape over that one.Any ideas on the ABS light? I cut all others
I think I will do what Dan Perry did and just tape over that one.Any ideas on the ABS light? I cut all others
On my car it’s the BRAKE light. If yours is different, send me of a photo of the location and I will see if there is a trace that can be cut.Any ideas on the ABS light? I cut all others
Takes all of 4 seconds to pull the cover off the cluster. Electrical tape over the LEDs of the warning lights you don't want to see, non destructive and easy.One of these days I will open up my panel, and cut the traces Chad mentioned.
I will trace & document the ABS light trace then... but here is some notes to help me:
View attachment 10292
I was able to delete all the codes that were throwing check engine lights on my 2010 SS using HP tuners - they make it really easy.After I took these images, I realized I shouldn't have covered the check engine light, so I went back and removed the tape off of it.
I should be able fix that in HP Tuners.
I'm waiting on a bid to have the circuit boards built by a production facility. I hope to hear back soon!Or we could wait for Brad to finish his next Goblin gadget and select which light we want to disable.
Goblin Warning Light Eliminator (Airbag, Seatbelt & Tire Pressure + Bonus Features)
Would be good to make this switchable if possible to accommodate both ways to build - if too difficult turning this off gets my vote. :) All of the features can be enabled or disabled from the menu. You can see it in this video from November:dfkitcar.com
As I sit here cutting these traces all I can think about is the Iphone headphone jack hack!Here is an updated version to include the trace to remove the BRAKE indicator on the dash. The BRAKE will light and stay on if your donor had ABS and now no longer has the ABS controller.
View attachment 5641