Search results

  1. Austin

    Critique my order (long)

    The new steering arms are included in the Goblin kit, so you'll be getting a set.
  2. Austin

    A Peek Into DF Kit Car

    GoblinGal might not take bribes, but I do.
  3. Austin

    Weekly Blog

    5/15/17 Control arms 1.5 inch tubes for frames. Tony's frame is welded out.
  4. Austin

    Weekly Blog

    It's solely hanging from the exhaust manifold. Adam has a shorty header on his goblin, but another mount wouldn't hurt.
  5. Austin

    Weekly Blog

    The straight through version of the muffler we get puts the inlet and exit in the center and that causes a problem for us. We need to be offset like it is in the image or the muffler needs to be higher.
  6. Austin

    Weekly Blog

    5/09/17 Matt TT's powder-coated frame has arrived. Driver side door bar being bent. Driver side door bar being welded into Tony's frame. Standard 2 inch exhaust for N/A Engines. 3 inch for supercharged. We are also going to build a 2.5 inch exhaust and dyno them on both N/A and...
  7. Austin

    Weekly Blog

    5/8/17 1.25 tubing plasma cut, working on 1.5 tubing now. Main hoop parts plasma cut and ready to be welded together. More of Tony's frame being assembled.
  8. Austin

    Weekly Blog

    5/4/17 Tubing has arrived. Everything off the truck. The start of Tony's frame being put onto the jig. Lasercut pieces have arrived but they forgot to bend them so most need to be sent back to be bent. Hood and engine covers that need to be trimmed.
  9. Austin

    Weekly Blog

    5/3/2017 Just learned that the tubing supplier postponed delivery until May 4th because the 1 inch x .065 round and 1 inch square tubing were delayed. Tried out the Dorman 800-301 fuel line repair tool and we do not recommend it. It does not work well with the Dorman elbow connectors we use...
  10. Austin

    Weekly Blog

    5/1/2017 Fiberglass being put down on the engine cover mold. Cold air intakes complete and ready for shipping. New bracket for the polycarbonate windscreens. GAVC's lights, mirrors, and windscreen has been shipped. Tubing will arrive tomorrow and will be setup for CNC and bending. Then...
  11. Austin

    Weekly Blog

    4/26/17 Matt TT's frame having the finishing welds put on and is now ready for inspection. Intake tubes cut to length, waiting for MAF plates to be welded on. Wider Rear Fender mold popped off and ready to be trimmed.
  12. Austin

    Weekly Blog

    4/25/17 Matt TT's frame is up on the jig being assembled. Two noses out of the mold, ready to be trimmed. Wider Rear Fender mold being fabricated.
Top