I put urethane bushings in mine I think from redline. I am mainly a road car with some autocross. Stiffer than stock but enough dampening to still take out the jolts. I have ran cars with full rod end setups and it does make the car tighter but you feel it when you hit a seam in the...
Don’t mean to pile on but I have been enjoying my goblin for many years. There were a few hiccups in the build process but to me that was part of the challenge and fun parts of building. Others hit it on the head the YouTube videos the goblin guys have put out were awesome putting the car...
Just getting back into modding my goblin, what was the finished dimensions you used for the splitter? I like this design and going to go with something like this.
You don't have to save the car shell to title. But if you sell the chassis and it is less than 12 years old the scrap yard that takes the chassis will want to scrap the title out this won't necessarily cause problems titling but could. So in my case being newer than 12 years old i cut the...
Welding strong tube to sheet metal would never hold in a crash even if it was welded perfectly the sheet metal will tear out. Major gusseting would be required with secondary backing plates. Tube chassis are not great in crashes between 2 cars not enough energy absorption. You might be in one...
I pulled the pump, swapped and greased the oring from the new one that came with the pump to the old one from the donor. I am not sure but the new oring seemed to have expanded or could have been a little larger than the original and it expanded until the o ring came out from under the lip of...
Yeah I have been thinking of cutting off the hard plastic lines and going with flexible pressure rated hose as others have. Not a huge fan of bending the hard plastic lines for install and the rubber lines look better in the car i think. I am going to pull the pump tomorrow while it rains and...
After I have driven a couple of times I have smelled gas while driving and had seen some gas come out the pump gasket area. Anybody see that? I have not pulled the pump get but I thought i set the 1/4" gap correctly. Any thoughts? Any causes i might not be thinking of?
I got the kit in late October already had the donor stripped. So it took me about 5 months for the build. I really enjoyed the whole build. Only tip would be really know what little extras you want to add and do it before you get almost done with the car. Also while my wire harness fit the...
Buddy i work with is building an exocet but he opted to put in a Honda engine in lieu of the miata, he wanted 300+ HP. Tons of custom work on his part. It is looking pretty good. Only thing he will be able to beat me on is the weight distribution so slightly better handling. Once he is done...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.