Hello friends,
It's me again...
I believe I have everything on the Automatic base model's harness figured out with a few exceptions differing from the turbo and base model, including the RPD. Does anyone know if I can run this as-is without the RPD, given that the harness is from a base model without the turbo?
To Lonny's point, the thing black wide connector has 2 extra wires on it on my turbo harness. Other than that plug and the RPD addition, the two are very similar. I have Lonny's wiring concerns fleshed out and mapped. I need to figure out the RPD daisy chain portion.
Looking at the back of my RPD connection it goes
TOP ROW
1: Tan / Black -> Black Body Harness Multiplug
2: Tan -> Black Body Harness Multiplug
3: Red -> -> Row 6 Column 6 of White BCM large plug & Dash Cluster
4: Red / White -> Row 1 Column 3 of White BCM large plug & Dash Cluster
BOTTOM ROW
1: Tan / Black -> Need Help
2: Tan -> Need Help
3: [Unused]
4: Black / White -> Ground Lug