Got a little snip happy and looking for some assistance as the ABS plug may have gotten me. Onstar part 2 plug: removed the green wire from white connector, and removed the two sets of twisted pairs from their opposite end connection points because i assumed i didnt need onstar capability. But when i realized i need the twisted pairs i now can not remember where they were connected. 2008 Cobalt LT. Based off of what i have read online i believe this is where they were connected.
I have found on the ABS plug that i cut both (in and out) sets of twisted brown/black pairs right at the plug. I also found the black and purple multi-plug below with one set of twisted pair that is a couple feet long and coiled up in picture. The other twisted pair brown/black from the plug in picture goes to the black ECM plug. In addition i found the onstar plug with the green wire and both sets of twisted pair wires all at full length (10+ feet). I suspect the twisted pair from the black/purple multiplug in picture went to the ABS plug. One set of the twisted pairs from the Onstar connector went to the back and blue multiplug and the other pair went to the other ABS connection.
Does this sound right? If so how do i address? HELP
Let me know if i can clarify better.