Part number for subframe?

Lonny

Administrator
Staff member
On base models the sway bar attaches with one bolt on each side, SS sway bars attach with two bolts on each side.

Also when looking at the back of the subframe some of them have a hole out by the control arm area on both sides. Some of the don't.
1545666794600783519741.jpg
 

KLMOTORSPORTS

Well-Known Member
Looked this up, so imagine the pricer FE5 subframe adds a little beef...

FE1 suspension
19-mm front stabilizer bar
16-mm rear stabilizer bar
Stamped steel front lower control arms

FE3 suspension
22-mm front and rear stabilizer bars
Cast aluminum front lower control arms
FE3 shocks and springs

FE5 suspension - 2005-07 years
24-mm front stabilizer bar
FE5 shocks and struts. The springs may be different from some FE3 models.
Larger front end links

FE5 suspension - 2008 and up years
24-mm rear stabilizer bar
NEW FE5(LNF) shocks, struts, and springs.
Updated front knuckle
 

Lethalcast

Well-Known Member
You can use car-part.com to search salvage yards around you for one or other parts you need. It would be a little leg work but I imagine a lot cheaper.
 
Top