Running LNF/TC axles with LSJ/SC?

[KLMOTORSPORTS]

So I am going with LSJ/SC and F40 transmission in my Goblin. Comparing the TC and SC axles, the TC are quite a bit beefier that the SC axles, so I want to run the TC axles. My question. Is what has to be changed in order to run them?

I believe the Control Arms, Knuckles, and Hubs are different between the SC and TC, is this correct? On the Control Arms, it seems the Ball Joint is larger on the TC...is that the only difference, so therefore I can just keep my arms and swap out the Ball Joints?

Thanks for any help...I should have thought of this before ordering my F40 kit, but not too late to swap my axles out (from LSJ to LNF axles)

Ken

 

[Lethalcast]

Pretty sure everything aside from the transmission input is different. You would need hubs, knuckles, calipers with bracket notched out from df, axles and the carrier axle with mount. I'm sure there is other stuff I could be forgetting or just wrong about. You could also just look for race axles for the lsj. Here is a little write up. https://www.cobaltss.net/forums/drivetrain-79/lsj-vs-lnf-axles-293002/