JSATX
Goblin Guru
Looking to get ideas and see what kind of odd problems or uncommon issues you may have had with your goblin. I’m putting together a little kit to keep in the car and just looking for ideas.
For starters I once was driving and had the fuel line pop off the fuel rail. I’ve since replaced that hose clamp with a higher quality clamp specific for fuel injection. I guess the first one I used was just for low pressure carb applications.
The only catch is everything has to fit in a .50 cal ammo can. That’s what I’m using as my glove box mounted above the fuel tank.
So my first few contributions are:
Extra hose clamp or two
Clear safety glasses since I don’t have a windshield
This cool little wrench, already come in handy once: https://www.homedepot.com/p/Husky-Standard-Total-Socket-97764/204295556
And my lug nut socket since it’s non standard.
Any other ideas?
For starters I once was driving and had the fuel line pop off the fuel rail. I’ve since replaced that hose clamp with a higher quality clamp specific for fuel injection. I guess the first one I used was just for low pressure carb applications.
The only catch is everything has to fit in a .50 cal ammo can. That’s what I’m using as my glove box mounted above the fuel tank.
So my first few contributions are:
Extra hose clamp or two
Clear safety glasses since I don’t have a windshield
This cool little wrench, already come in handy once: https://www.homedepot.com/p/Husky-Standard-Total-Socket-97764/204295556
And my lug nut socket since it’s non standard.
Any other ideas?