Stretch2126's latest activity
-
Stretch2126 replied to the thread GOTW - 4-19-24 #386 Cooper Banks.They definitely act the way they look. Game changer. -
Stretch2126 replied to the thread New Member Introduction.Also forgot obviously the alignment matters lol. Learned that one personally.
-
Stretch2126 replied to the thread New Member Introduction.What springs are you running in the front and back and how many clicks from soft are you running? Suspension can really change the...
-
Stretch2126 reacted to MX184's post in the thread MX184's Roadster Bodied Track Goblin #311 Log with
Like.
Random photos from Sick Week.... -
Stretch2126 replied to the thread Wide wheel options.I’ve looked at the bronze Konig hyper grams before. Light and look good. I think they have both 17x9 and 17x10.
-
Stretch2126 replied to the thread Stretch’s ext. track goblin #386 SS/TC.Stock cams. Just 82 pound springs to prevent float on old stock springs. I had a lifter hold a valve open before when I got them back...
-
Stretch2126 replied to the thread Stretch’s ext. track goblin #386 SS/TC.I’ve borescoped the cylinder and it looks fine. Full compression can back and the valve moves freely. I had a hiccup with the lifers...
-
Stretch2126 replied to the thread Stretch’s ext. track goblin #386 SS/TC.Good news! I took the cam follower off and tapped the valve to clear it just in case. Regained compression, leaving me to believe the...
-
Stretch2126 replied to the thread Stretch’s ext. track goblin #386 SS/TC.Valve spring let go on the exhaust side. They’re only a month old and I was easy on them the first couple rides. Installed heights were...
-
-
Stretch2126 reacted to RobC76's post in the thread Stretch’s ext. track goblin #386 SS/TC with Like.
Crap Hoping for the best!
-
Stretch2126 replied to the thread Stretch’s ext. track goblin #386 SS/TC.Not a fun update. car left me stranded last week and barely idles. Compression test shows cylinder 3 with ZERO compression but the...
-
Stretch2126 replied to the thread Right/left caliper imbalance.Corner balancing absolutely helped. Total weight without me is 1630. With me in the car it’s 33/66 front to back. Had to play with the...
-
If it's not an issue in the brakes like air or a stuck piston, whack corner balancing can also cause unequal lockup. I wouldn't put it...
-
Stretch2126 replied to the thread Right/left caliper imbalance.I can try that again to make sure. The car is about a year old now with plenty of miles on it. I forgot to mention that sometimes it...
-
Anyone else have one side lock up first? Seems like my front left will lock up way too early or at least before my right. I switched...
