No major updates here. I messed up and ordered the wrong flywheel bolts, twice.... I think I have the correct ones now and will be mounting the flywheel/clutch assembly tomorrow to make sure I don't need a shim. It's a ZZP lightweight flywheel with a Southbend Stage 3 clutch. I'm thinking I'm going to need a shim but I haven't ordered it. If we're not needing one, the motor will be installed this weekend.
The front end is complete with the exception of some very minor things. The driver's seat, seat belts, and steering column is all assembled and done. The passenger side is ready but waiting for the shifter and hand brake install. The pictures from the shimmed steering column are from the
other thread but I wanted them here also.
Also for posterity, the Corbeau A4 seats can be installed using 1" square tube shims on the front being bolted straight to the seat mounts on frame. It does push the seat further forward a it's pretty low.
I'm working on a full front bottom plate with some winglets. It's still in the works and I've cut 3 templates. These are pictures of the second and don't have the end plates or sloped ends done yet. Alan likes it!
I'm working on mounts for a double gauge mount for a Aeroforce dual gauge set up. That'll be done this weekend for sure.
Next will be wiring in a front/back motorcycle dashcam set up with the monitor mounted below the button panel (I think). I also have a dual dashmount USB power port that'll be mounted next to the dashcam monitor.
A bunch of little things going on waiting on the motor and the backordered button panel.