Where does this connect to?
Stock pulley... new long block in the donor... intake was oily... but that could have been from the other 170k miles that was put on the SC. Just saw alot of others that had the problem... especially when speeding up the SC.Towerdog, are you pushing your supercharger faster?
My stock supercharger makes 12PSI, and I don't get any oil out of my valve cover mini air filter, but I have heard of other people saying that it needs a catch can.
Lokian has an LS donor, I have an LT; both are (currently) naturally aspirated and shouldn't have crankcase pressurization issues like oil blowing out of the breather or a dipstick that likes to pop out of the tube.Not sure if it is a SC only condition but the valve cover vents to the intake and blows a ton of oil into the intake so just venting the valve cover will blow oil all over the place.... I opted to put a catch can between the two...
yup all natural. . I have a breather filter on the valve cover atm so I'll just block it off. If I ever have issues with it then I'll go the catch can way.Lokian has an LS donor, I have an LT; both are (currently) naturally aspirated and shouldn't have crankcase pressurization issues like oil blowing out of the breather or a dipstick that likes to pop out of the tube.
Mine had too big of a gap between tha tunnel and firewall
How did you know how to wire the tail lights? I can’t seem to find a wiring diagram. I know it’s simple, but if someone else has already figured it out, sure would save some time.Front suspension done and we have rear lights.
Installed connectors for all lights so I can replace easily in the future if needed. Will do the same with the side mirrors.
Ran power and video cables for the rear view camera and monitor. Moved the daylight running lights from the headlights to the dash area to be used for button lights and dash lights. Ran usb outlets from the bcm using accessory power. Tunnel cap installed.
View attachment 22612View attachment 22613
This thread post #2 and #3How did you know how to wire the tail lights? I can’t seem to find a wiring diagram. I know it’s simple, but if someone else has already figured it out, sure would save some time.
Perfect! Thanks!This thread post #2 and #3
http://dfkitcar.com/forum/index.php?threads/wiring-rear-lights.2308/
backup camera and instead of a rear view mirror, ill have a rear view camera on all the time to see behind me. I do not have full cage and no way to mount a rear view mirror.Nice brackets.
Reason for the rear view camera?