Search results

Mine is a stock turbo with big wheel. 235 r888r, my IAT I think low 100s. I do have the aftercooler with front ducting. But I’m at 500ft

I think low 12s or high 11s should be easy to get. I got 13.3 and I let off just before the 1/8 mile. I have the torque management set to 50-60% in 1st gear, and 100% for the rest. I’ll adjust that some more and I need to get a better alignment before trying a full 1/4 run.

I did my first two pulls with a dragy today. Did 60ft 1.84s, 1/8 [email protected] 0-60 3.67s. I had a little spin in first launching at 3k, very little slip shifting into second.

finally got my plates! Had to still pay $800 in taxes. Local registration said the sales tax I paid is not motor tax. I asked them to call Texas Comptroller and we waited about 45mins before someone picked up. After about 10mins, the guy (Scott) told her no this kit car still falls under...

I just got my call! I'm in DFW, when I went to check on it last Friday they said they had three of us waiting on Austin's reply. I'm not sure if they were all goblin or other ASVEs.

Good luck on the final steps! I’m on week 7. Hopefully I’ll get a call soon too

Got inspection done with correct correct VIN. Had to do inspection without emissions. Hopefully Dallas DMV accepts it.

weird we tried that but it isnt working. Do you have to title it first? I went to two different places. The software was the same. They selected inspection and emissions. It asks for insurance expr date, registration date (they put in all zeros), vehicle weight (1800), then year (2022)...

did you have to do normal inspection? And if so what did they enter for the VIN.

anyone can send me a picture of your inspection?? Just interested in the vin/make/type section. They couldnt enter DFGB0278 as a VIN and they also tried adding a bunch of zeros and it wouldn’t accept it.. so I had them use the donor VIN. DMV didnt like that. Also DMV says to use make “ASVE”...

I got the nine lives front wing and the spacing is 18" instead of 16 1/2". And the mounts are a different. Anyone recently mounted a nine lives front wing?

so the guy that did the ASE inspection had his ASE certification expire. Anyone in the DFW area know someone who has it? I tried a all local shops near me. Going to try the dealership next

Did any of you need to show the actual ASE certified Master certificate? Dallas regional office is very new to the process requiring the local emissions and an actual copy of the ASE certified Master certificate, which was not on the list. They also tried to call it a sand rail but after a few...

I have the same "x7f negative response code" reading the PCM with hptuners. It can read the VIN. HPtuners said it doesnt have a locked tune, he thought it was electrical connection issue. But I swapped PCM with my Solstice and I can read that PCM in the kit car and still cant read it in the...

Meansol - Forney TX - 2010 SS/TC - EXT city w/ EE,DB - #278 - n/a

Thanks, I'll try contacting MOOG directly. Im thinking the numbers are just batch numbers. To me the boots on the gold ones are a better design.

Both gold ones have scratches on the inside. All of them are banged up some from shipping. I'll remove the old ones this weekend, need to find a big enough ring to remove them. It's bigger than my largest socket.

So I ordered two of these bushing from Amazon for my LNF goblin and got two different color bushing. Gold and silver. They measure out pretty close to the same except the big outside rings is slightly larger on the the gold one. (see first couple of pictures). I dont think it will be an...

I see #278 in your pics! Cant wait. Thanks for taking time out of your busy day to get pics

Sign me up for the full kit. I can be on the later group too. I ordered my kit car, and I'm on the 2-3 month backlog.