Search results

Here is my 6 foot 2 inch tall brother in mine, the seat is in the middle setting also. Height wise you will be fine with the long, I have a 36 inch inseam and this will be my driving position. You will need to figure out something on the seats though.

I had to do the same thing also.

A side note, does anyone know why there are 2 sets of holes for the seat rails on each side?

I did all my rivets with a hand tool also, one that I got from Advanced Auto 10 years ago, this more than doubled the lifetime rivet count!

Ok, so I got some half inch spacers to move the wheel down. I still have to get longer bolts, I can never seem to get any job done in one trip. Anyway, here is the height delta. Seemed to make a pretty big difference to me, this will work good for my application.

I will get some today.

I got my 6 bolt to 3 bolt adapter today, way before I thought I was going to. Here it is ...... This is the wheel provided in the kit And here is the NRG setup with the new NRG wheel. It looks to add a little over 3 inches, just as I thought. I dont find it to be too far back, but I do find it...

Stopped at a bike shop over the weekend and they recommended these....https://www.pathfinderled.com/

One of my friends had a custom bike mount made for his motorcycle.

Someone with a track chasis needs to put a kayak on top!

I just went to the local Tractor Supply and bought a 5 foot piece of chain, and used a couple of my climbing carabiners.

How difficult are these to adapt to the Goblin?

I have the extended chasis, and sit back a ways. With the DF provided setup, the wheel felt a little far away.

I went with a new NRG 6 bolt steering wheel, so I only need 1adapter. It had the advantages of having a built in horn button also. So the quick release mounts directly on the steering wheel. But I have to wait for the adapter to get me from the 3 bolt steering hub to the quick release. Untill...

This part bolts to the adapter, 5hen the quick release onto it.

That is exactly how I am doing it, but have to wait for the adapter to come from Hong Kong. The 3 to 6 bolt adapter will go in place of the DF supplied steering wheel.

Same one that I bought 2 days ago, just waiting on the 6 bolt to 3 bolt adapter.

I called them a month ago and the guy I talked to wouldn't split them, but 50 bucks is hardly worth it. I'll try to sell the rears on the cobalt forum. I'll probably run these for a while and keep an eye out for set of better ones on the Cobalt forum.

I am going to get different springs, may get them from Qa1. I haven't even decided to keep these, the box stated 100 percent satisfaction guarantee. I am not 100 percent.

I tried to get fronts only, they only do all 4. Not sure what I will do withe the rears.