Things are not looking very good for the Nebraska contingent. The Goblin and OLDB1 will not be showing- since the Gobin has no paperwork/plates and currently missing back wheels. The Stalker is ready to go- I think (not much opportunity to test drive much in the current weather). I also still...
Here is the turbo outlet solution we came up with to miss the rear frame member we shortened and turned the stock turbo outlet in an old lathe- it would have been prettier if i had access to my own shop but we are very crunched for time at this point so it will have to do for a little bit.
Our...
Sorry man. I did manage to get ahold of Lisa in the front office the other day. I was so surprised that she picked up I forgot half the questions I needed to ask. but she said she is currently the only office worker so if she gets up to go to the warehouse or on one line then it goes to...
I never was a fan of the "dune buggy" style headlights so i whipped up something a bit more fitting to the stalker look while waiting on goblin parts. what ya all think?
i ran into a few issues. . . apparently i had the hood open sooooo darn long that it warped the shape of the fiberglass so...
Has anyone talked to goblin HQ lately? i have a bunch of parts on order and requested our MSO via email and called over a dozen times. It goes straight to Lonnie's voice mail- and i left one message- no need to go overkill. lol It's been all less than even crickets. i am going to try one more...
ah ha- this is more what i need i think for the time being. still not 100% ccgillett's Track Goblin - '08 SS/TC | Page 10 | DF Kit Car Forum
link posted for access at oldb1s shop
oh good golly what a mess! i will be cancelling my current tubing order got one. the "U" is definitely a fair bit short of 180.
The only MAP pipe I have located is 3" guess we go back to the drawing board.
Also, while I was at Oldb1's shop we looked at engine mounting. . . Luckily the engine bolts and former seat bolts we need turned up after some shop cleaning. However, we never did not get the hardware pack "K21D" with the spacers as referenced in the video. So still no EZ-buttons for us. lol...
So i stopped by Oldb1's shop on the way back from a doctors appointment and we talked about all the turbo piping i just ordered. weeeeeeelll looks like there may be a problem! so i ordered THIS MAF Amazon.com: 3 inch OD MAF pipe mass airflow housing pipe for 2005-2010 Chevrolet Cobalt SS Air...
opps forgot the link
Amazon.com: 3 inch OD MAF pipe mass airflow housing pipe for 2005-2010 Chevrolet Cobalt SS Air intake tube aluminum SS : Automotive
We got our kit after an estate auction of a friend that passed away after the car did not sell for the reserve that the kids had placed upon it. the kit had also been in storage from 2018 thru 2023 so many of the parts could not be accounted for at the auction. that is one big reason it has been...
Also if you reference the photo above: the last chrome-ish AIR tubing headed into the intercooler can anyone identify that particular bend? would it likely be included in a universal kit? i am pretty sure i will need to source 135 degree bend for the throttle body hook up separate from a...
a question regarding the intercooler liquid plumping. . . somewhere i found a schematic but not on this computer presently. i believe this system is closed loop- is that correct? does it in any way tie into the radiator coolant overflow bottle? i found this picture of a T- with a flush fill cap...
oh man oh man. thank you tons for the pump link that is super cheap compared to the others. Oldb1 and i were going to snatch a loaner off of one of our supercharged cars to get by.
thank you for the info! that pump cost MORE then the supercharged cobalt we bought 3 days ago on coparts. well before all the buyers premiums and fees double the out the door cost. . . . we bought that particular cobalt for an upcoming project that is NOT a goblin. . .but it may loan us a pump...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.