Good Afternoon,
Just trying to open up some additional space. As I pull stuff out I’ll photograph and list here.
(1) 2010 Ecotec 2.2 with 7,000 original miles
(2) numerous wiring harnesses (1 complete body supercharged may have the engine also) 2 complete 2.2 automatic wiring engine/body...
Good Evening,
Listing a completely new fully forged balanced and blueprinted 2.4 Ecotec with a BorgWarner turbocharger. (All the information is on the “Normal Aspirated Ecotec (Turbocharged build)”)
FOR SALE asking $7500 plus shipping
(look up all the parts on ZZPerformances website you will...
Good Evening,
Kind of changing gears... Initially was going to swap out the windshield and hood that is on BLUE and put them on Nathan’s frame. (First issue is the roll bar on the earlier frames has a slightly different angle - not a big deal couple of spacers -). Then Nathan saw the new hood...
Good Evening,
I never really intended on putting an adjustable seat track in either of the Goblins. (We initially built and placed the seats for the builders/drivers comfort). But that has all changed seeing that my wife seems to likes to drive it. (Autocross it)....
PIECE OF CAKE... “WRONG...
Good Evening,
I picked up a couple of spare harness a couple of years ago when I was just starting to build the “BLUE” Goblin. Before there was instructions really didn’t know what I was going to need in the future. So I’m trying to identify what this one is off. I had it labeled as a 2007-2008...
Good Afternoon,
Is there any to eliminate the entire key assembly and wiring??? The stand alone harness did just trying to see if it is possible....
THX,
Bruce
Good Evening,
Looking for information with regards to wiring (actually unwiring) a automatic transmission harness. Basically I have never really been happy with the way the automatic transmission shifts everything has to go through the TCM. Especially in auto cross events it tends to get...
Good Evening,
The three basic transmissions that where available for the Chevy Cobalt, HHR and Saturn IONs.
- 5 speed F35 (MU3) manual
- 5 speed F23 Getrag manual
- 4 speed 4T45E automatic
Granted there is the F40 and a couple of other ones that will also bolt up to the Ecotec...
Have a...
Good Evening,
A good percentage of the builders have stated that they are going to build their Goblin with the stock N/A or the runout SS/TC engine from their donors. Then build their dream engine to install at a later date. (So I initially did rebuild the 2.2L Ecotec/transmission for “BLUE”...
Good Evening,
I kind of did a knee jerk purchase of an engine on eBay (placed a really low offer and it was accepted ).
So here are the pictures of it all layed out. Still trying to figure out which model it is (valve cover has a 2012 date on it). Initially thought it was a LEA but not so...
Good Evening,
Couple of weeks ago pulled a Bradley GT body out of a farmers field. (Traded some VW parts, and tipped the AAA tow truck driver after burying my truck and trailer trying to get it out). Never really liked the look of it but the price was right along with the wheelbase. So...
Good Afternoon,
Picked up a couple of Miata car covers. Fits really nice on a standard frame without the rear wing. Could be a little longer (sides actual length is good) for a standard frame with the wing installed.
Good Morning Guys...
Just starting to see more Goblins getting put on the Dyno’s....
Here are “BLUE’s” numbers....
From; BARAIR build log Mar. 4 2017 page #59
221 hp with 190 foot lbs of torque using 10 lbs of boost...
those numbers are at the wheels...
Will be interesting to see...
I thought I had read somewhere that the Pontiac G5's with the 2.4 Ecotec had forged internal components. Can anyone confirm that? What years and models....
THX
Has anyone considered welding in a slightly thick are steel floor (and back wall) into their kit. To replace the aluminum floor (wall) that is supplied with the kit. Reason that I’m asking, had to remove my seats while I was installing the emergency brake handle and even with the small amount...
Afternoon,
Check your rear strut bolts???
This is what they should look like.... with about this much thread sticking out.
This one here is not correct (you really have to play with it so that the upper spacer (aluminum supplied with kit) slides onto the strut piston. Never liked the...
I’m Looking at possibly moving on to a different project come spring. If anyone is interested in a finished Goblin.
THX,
Bruce
[email protected]
(716) 510-6830
HERE IS A QUESTION FOR THE GROUP....
Ideally I would love to run a stand alone electrical system for the engine and then just a simple electrical system for the miscellaneous systems for the car (lights, horn etc...). First is that possible with an Ecotec running a throttle by wire system? There...
Created a thread in the general discussion with regards to a bunch of donors available in the Buffalo, NY area probably should have been here instead. So I'll repost the pictures here but the text is in general.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.