Yeah you need a certified weight ticket. Any pilot or truck stop has a semi scale. I just rented a uhaul trailer and drove on the scale with the entire rig weighed in and then pulled around and unloaded the goblin then weighed again and you'll have your weight
Yeah I built one from gun case foam on amazon. It works quite well and sends the heat down instead of coming right at you from under the hood. The one problem it created was pulling heat from behind you between the engine cover and firewall since there was no airflow coming through the cabin...
It was extremely loud and violent. I was instantly like oh **** there goes the engine and hit the clutch but then I realized it's still running Haha. I pulled over and realized what had happened and the other half of the balancer was just sitting between the fuel tank and subframe. The balancer...
Just put a new dorman harmonic balancer from advance auto parts on the car a few weeks ago and it just exploded on the highway. Caused a bunch of damage to the tank and front cover with some other minor damage to the rad hose, brake line and the belt tensioner.
You don't have to go crazy with dot stuff cnc. Mark in ocala looked at mine for 10m and I got theregistration. I even had some square light bar cubes for headlights on it haha. He's more worried about seatbelts, windsheild and making sure it had brake lights and a tag light.
The bushing the shifter ball rides in wears out/dries out and can cause the shifter to feel tight but will move around in the bushing. Mine was worn some at 68k. I've been trying different greases for the shift ball/bushing and the linkages with mixed results. The last grease has made it the...
I did replace my cobalt ss one with one from an hhr from a junkyard. It was a different part number and to me I noticed a difference in driving but I have no way to know for sure.
Mine went out a few times and I didn't like it at all. At speed the power steering has no noticeable assist it seems like but I didn't drive mine at higher speeds to check this. Would be interesting to know if it does assist at say 50+ mph. It's at low speed you'll be glad you have it imo.
CHEVY...
That I'm not exactly sure of. I think they would clear height wise but I'm not sure width even with the spacers. We would need to do some measurements to see.
Thnx Desert and yeah I threw a 5.2" spal fan on it that's wired up to key on. It would be more than sufficient in florida here if I was running stock. Especially with the two heat exchangers and mustang hood scoop under front lol. Adam and I are working on something that will work for people...
Here is the info on it if anyone is interested. The fan I used is a spal 5.2" and the bar mounts. The bar mounts are the same size as the lower bar so I did have to widen the radius some and then I cut some paint protection film and put it inside the mount to protect the powdercoat. I couldn't...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.