6 bolt steering wheel adapter?

[Brian74]

I plan to run a different steering wheel in my Goblin (one of the Momo or OMP 6-bolt standard racing type).

I do not plan to use a quick release hub. Can anybody recommend a proper hub adapter in order to facilitate this?

 

[Karter2026]

This should be the adapter you need. It is for the Cobalt steering shaft.
NRG Adapter

 

[DCMoney]

You can also use the 3 bolt adapter that came with the kit and a 3 bolt to 6 bolt adapter. Can be found cheaper and with different styles. Didnt like how big the NRG adapter is.

https://www.kartek.com/parts/mpi-black-3-bolt-grant-pattern-to-6-bolt-momo-sparco-nrg-mpi-pattern-steering-wheel-adapter.html

 

[Brian74]

I was hoping a regular 3-6 bolt adapter would work but wasn’t sure.

Didn’t know the actual splines were the same as the Corvette. Makes sense.

 

[DCMoney]

This is the exact one I used. I used it over the first link one because its got some depth that allows the nut to stay recessed in the adapter so you dont see the nut that hold the 3 bolt adapter on.

https://www.kartek.com/parts/anodized-black-billet-aluminum-3-bolt-grant-pattern-to-5-bolt-grant-pattern-steering-wheel-adapter.html

 

[Tinkles]

NRG 3 bolt to 6 bolt adapter.

NRG Innovations

NRG Innovations

www.getnrg.com

 

[Brian74]

I ended up ordering the MPI GM splined adapter as well as the MPI wheel and additional button plate. Hopefully the geometry will pan out but I wont know until my seats arrive.