BUCKSHOT614
New Member
Does anyone have the wiring diagram for the button panel surround
can you link this video series? I am struggling to find thisYour question is not particularly clear. The button panel comes with a wiring guide page, and it's all detailed in the new wiring video series.
Thanks for responding so quickly Ross, I have come across that link before and no offense, but It is pretty much looks like chinese to me lol. I am so underprepared for this section and I am struggling. I am thinking I need to cut this piece (picture with hand in it (which goes to rear of of the speedometer))Some button panel wiring info here.
Also, do I need to go get the resistors listed in the link you provided? I can just go to autozone and ask for the specific ones listed?Some button panel wiring info here.
Early model Cobalts (2005-2007) have different wiring than the late model Cobalts (2008-2010)
Did you do your own harness or did you have DF do the harness for you, either way you should have a bundle of wires coming off of the harness without a plug. the first picture you show looks like the instrument panel connector which you do not want to cut.Thanks for responding so quickly Ross, I have come across that link before and no offense, but It is pretty much looks like chinese to me lol. I am so underprepared for this section and I am struggling. I am thinking I need to cut this piece (picture with hand in it (which goes to rear of of the speedometer))
-
And then do the following the diagram you linked, correct?
If your button panel set came from DF it should have the resistors already installed, if you are making your own panel set you will need to source resistors.Also, do I need to go get the resistors listed in the link you provided? I can just go to autozone and ask for the specific ones listed?
I had DF do it for me. THANK YOU for replying! lol I was about to cut away because I am so impatient. I am so dumb and just overlooked everything that is in plain view and perfectly labeled by DF. Sorry for all the confusion.Did you do your own harness or did you have DF do the harness for you, either way you should have a bundle of wires coming off of the harness without a plug. the first picture you show looks like the instrument panel connector which you do not want to cut.
If your button panel set came from DF it should have the resistors already installed, if you are making your own panel set you will need to source resistors.
They're all here, somewhere: https://www.youtube.com/@Dfkitcarcan you link this video series? I am struggling to find this
That is the wrong connector. That one goes to the instrument panel.Thanks for responding so quickly Ross, I have come across that link before and no offense, but It is pretty much looks like chinese to me lol. I am so underprepared for this section and I am struggling. I am thinking I need to cut this piece (picture with hand in it (which goes to rear of of the speedometer))
-
And then do the following the diagram you linked, correct?
That helps also! Thanks for sharing!Photos of Back of Button Panel
Thanks everyone, got it installed. Here is my schematic, I also posted it in my build log. Just through I would add it here as well incase someone searches for a remedy to this very issue.dfkitcar.com
Here is what I did. Keep in mind this is for the early model wiring scheme.