Custom STL Files for 3D Printed Goblin Parts

[Jmar1622]

Had a hard time trying to track down files, and even now I am still trying to find the *.STL file.
For the time being though, I can provide the G-Code for direct to printer settings... but USE AT YOUR OWN RISK.
gcode is tweaked for my printer and may not be the same across the board... however you may be able to convert using your preferred slicer.

just be certain to change the file type from "txt" to "gcode"

These are really easy to make out of steel. I made mine with scrap 1/4 on the bottom and tube stock for the mount.

 

[Spague]

There are a lot of really good designs for printing in this thread. Here is another.

A version of a center console for mounting on the tunnel. This is made for two phones and a key fob with extra room for other stuff.

View attachment 42601


Here is flat-bottom version of our original design. This works well forward of the shifter on the tunnel cap.


View attachment 42607

If I were to have one of these printed is the measurement in MM or SAE?

 

[ctuinstra]

If I were to have one of these printed is the measurement in MM or SAE?

MM