Zoom Zoom
Goblin Guru
Here’s a picture of bolt, Adam will probably sell you 2 of these bolts 4 1/4 inch long with a 3/8 Allen headWhat are the specs on the socket cap bolt to mount the brackets on the frame? I see that style in Zoom Zoom pictures and I think also in Ark's picture. I'd rather use that style bolt than a hex cap bolt that came with my early tow bar kit. I don't have a way to get a wrench or socket fully on the hex head mine came with, I can only angle an open end wrench off barely grabbing the faces of the bolt (which frequently slips off). Changing to the socket cap style would make the alignment easier to adjust.
I know it's 1/2" diameter and 4" long but haven't checked the thread to see if it's -13 or -20. I also don't know the grade but I assume grade 8.
This image shows the bolt I'm talking about:
View attachment 20312
20 thread pitch from mcmaster but I don't see a plated option:
McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.www.mcmaster.com
13 thread pitch from mcmaster:
McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.www.mcmaster.com
Attachments
-
258.8 KB Views: 227
Last edited: