.
- Thread starter LLBenJ
- Start date
GoblinGuyZ
Well-Known Member
Will take some pics of my front. While I'm here I would also love some pics of anyone with rear fenders and BC Coilovers. I got a pair of used fenders but I think the mount that came for mine was for the stock struts so may need to fabricate the rear mounts on mine but some pics of how it's supposed to be run would be helpful. Thanks!
GoblinGuyZ
Well-Known Member
Front pics as promised...
Watch for this clearance before you drive. I have a 15x8 +35 and it rubbed. This pic is with a 4mm spacer. If you are using a 16 or larger you would probably be ok.
Watch for this clearance before you drive. I have a 15x8 +35 and it rubbed. This pic is with a 4mm spacer. If you are using a 16 or larger you would probably be ok.
Vwsaabvt
Goblin Guru
for such a small amount of room needed I don't think you'll need bolt on spacers and could try these wheel spacers just make sure your studs are long enough when you install your wheels