Ghostknife's #383 Track SS/SC

Mahkoi

Goblin Guru
Those look good. I dont like my big round headlights. I did put headlight tint on them and it makes them bearable to look at.
 

Markm

Well-Known Member
I like them. Let us know how they work cause my wife drives to and from work in the dark sometimes. I’m ok with the low beams but not the high beams. I have the DF lights with led bulbs.
 

Rttoys

Goblin Guru
Looks good

the only bad thing is led’s like that project all over. not a bad thing for you, but blinding for oncoming traffic. I have my low beams pointed at the ground to not blind traffic and use highs when no one is around.
 

Ghostknife

Goblin Guru
I will let yall know how they work, I don’t wanna blind every oncoming car. My last lights were a “driving” light with a 60* width spread and only a 8* up and down so it wouldn’t blind others. Worst case I go back to them and add a dedicated high beam
 

Ghostknife

Goblin Guru
Had such a good time at the Detroit Grand Prix car show this past Friday. We got to do a parade lap around the track and parked on the main straight. When the show was over, the cars in front of us were out of the way and myself and a few 911s got to get some speed up. So much fun!

52400


52401


52402
 

ah.b.normal

Goblin Guru
Had such a good time at the Detroit Grand Prix car show this past Friday. We got to do a parade lap around the track and parked on the main straight. When the show was over, the cars in front of us were out of the way and myself and a few 911s got to get some speed up. So much fun!
:mad: I hate you in all the best ways! Looks like too much fun!!;):cool: I hope you showed those digit cars what real cool is.
 

Ghostknife

Goblin Guru
So I have been chasing a shifting problem, not being able to lock into third and fifth gear. So many adjustments made in the shift linkage and still know measurable success. I pulled the fuse box out of the way and realized the weighted part of the shifter is hitting the coolant line to the engine. Does anybody have a picture of how this line is supposed to be ran so I can adjust?
 
Top