Harness guide Part 10 2:50.

[Dakota8800]

Slow and steady progress. The wiring harness a been a huge and tedious learning experience for me, but I think I secretly like it. The end is in sight!

In harness guide, Part 10 2:50, Lonny references a green wire with a white stripe and a pink wire (For older models such as mine) to add to the button panel wires. I think I found the wires, but they are on a connector I labeled 'cluster control'
Are these the correct wires? Should I just cut the connector in the picture and add it to the wires referenced?
2005 ss/sc

Thanks!

 

[Lonny]

Those are your info and return button wires that control your gauge cluster.
You will need the pink and green with a white stripe.
Don't get the pink wire mixed up with the positive pink wire.

 

[jaredthenav]

Lonny, so can the other wires on that plug be stripped out?

 

[Lonny]

Yes

 

[Dakota8800]

Those are your info and return button wires that control your gauge cluster.
You will need the pink and green with a white stripe.
Don't get the pink wire mixed up with the positive pink wire.

Awesome, thanks! I'm a dummy and I forgot to label each pink wire. However, I will just trace them and refer to alldatadiy to find which is which.