MISC. Goblin and Ecotec parts for SALE...

BAR-AIR

Well-Known Member
Good Afternoon,
Just trying to open up some additional space. As I pull stuff out I’ll photograph and list here.
(1) 2010 Ecotec 2.2 with 7,000 original miles
(2) numerous wiring harnesses (1 complete body supercharged may have the engine also) 2 complete 2.2 automatic wiring engine/body harnesses...
(3) Derale Hyper-Cool remote mount fluid cooler (new)...
(4) Set of Corbeau seats....


Engine:
6A524D7E-F218-4061-B636-386E804C6423.jpeg


Seats:
8F9A3DB3-3517-4F5F-8983-C0AE7BD02D59.jpeg


Cooler:
F0DFEA6A-8E79-45D6-A138-D94961102376.jpeg


I had stripped out 3 Cobalts (have plenty of seconds and thirds of addition parts) anything rusty wasn’t saved anything else was...

THX,
Bruce
 

Attachments

BAR-AIR

Well-Known Member
Good Afternoon,
Just going to load additional pictures as I pull parts out and photograph...

(1) one sliding seat track (only put a slider on the drivers seat in “BLUE”
A09F1905-97E1-4AC2-AF4A-556F4F9C4534.jpeg


(2) brand new cam for a 2.4 Ecotec (pulled to replace with performance cams)
6BB71ED0-217A-4515-8E56-5EA16D463B92.jpeg


(3) Sway bars (stock and one from a performance)...
6C7E21FC-E702-4A6B-9BDC-96596C25EDE2.jpeg


THX,
Bruce
 

BAR-AIR

Well-Known Member
Good Evening,
Here are a couple more...

(1) 2 sets of rear wing (spoiler) mounts...
1F5B8572-16A9-4F2A-AF14-97894F651FB8.jpeg


(2) Couple of catch cans...
D66B51DB-6995-46A7-9FB3-3405F501971D.jpeg


(3) 2 sets of computers...
D6D98E9C-1A4C-4851-882E-968B77CAF53F.jpeg


(4) Set of powder coated brake calipers (with pads and rubber lines)...
81DFA71D-8DAD-4860-93CD-CA230D8854E7.jpeg


(5) Ended up I did have 2 individual seat tracks (different manufacturer)...
DE6574FB-E956-4F7B-BBD3-3C0435DB583B.jpeg


THX,
Bruce
 

BAR-AIR

Well-Known Member
Good Evening,
Additional....

(1) Complete cable driven windshield wiper set up...
4D64E203-81C8-4E6F-BF9A-1E5F42DA8E65.jpeg


(2) Couple of new mufflers...
0ABCC583-334C-42D2-B52D-0C0B96DB9821.jpeg


(3) Exhaust set up I initially used on “BLUE” overheated the catalytic converters (bad initial tune with the supercharger). So the catalytic converters is hallowed out...
353A97EA-8059-4DAF-BDEF-810DCE2544BD.jpeg


(4) Misc. Stainless Steel exhaust tubes...
DE90E9A0-FE31-475B-8A66-DB634D00AB09.jpeg


(5) Brand new springs and belt (think it was the spare for the supercharged Ecotec???)...
3EC93EF3-8DC5-4718-9081-E4EB08483F82.jpeg


(6) Motor/Transmission mounts for Cobalt and Polaris Slingshot...
6A9D999D-00D6-490D-B4CA-AF818A84CA94.jpeg


THX,
Bruce
 

Attachments

BAR-AIR

Well-Known Member
Good Evening,
Additional...

(1) QA1 #300 springs and new strut boots...
D1793DF2-0BB6-4A81-AF7F-8D690244A70C.jpeg


(2) 5 3/4” headlights, Coolant tube for Non-turbocharged engine, Set of engine bolts from a new engine that were replaced with studs...
C5CA010A-BC38-4539-A6FC-D87736A911FB.jpeg


(3) 2 Sets of lug nuts 1 set short, and 1 set long, wheel spacers...
0D750F88-0ACF-4DD5-9953-B9EBE1C30205.jpeg


(4) Intakes...
7A1555AF-78F6-4914-BD0D-70AF6882693E.jpeg


(5) Simple shifters and an automatic shifter knob...
D0D7794E-75CF-44FD-96D8-B2EB7C142A72.jpeg


THX,
Bruce
 

BAR-AIR

Well-Known Member
Good Evening,
Last one for tonight...
I’ll get into the harnesses tomorrow...

(1) 2 complete electric steering boosters plus 2 addition motors...
6263C5D0-A5CF-450D-B167-EE5523A62E2C.jpeg


(2) 2 complete brake boosters with new master cylinders...
92C62328-FDC5-4579-8AB9-823C90CFDF40.jpeg


(3) 3 different emergency brake handles...
C4C79B13-1DAD-456F-9E8F-0BF2C18AA1F6.jpeg


(4) OEM steering wheel assembly and OEM automatic transmission brake pedal box...
CE433A33-5003-4415-9117-9F86F144DFB9.jpeg

CC3D1195-B7C6-4D0B-9076-FC58DB58571C.jpeg


(5) misc. OEM parts...
40DCFC57-6523-4E4B-A0F7-987996101EA1.jpeg


(6) ZZPerformance adjustable tensioner...
DD17130D-613F-4FC2-8D9A-8801FD73D1E4.jpeg


THX,
Bruce
 

BAR-AIR

Well-Known Member
The parts listed above just scratches the surface. We probably had enough parts to build a third and close to a fourth car.... (plenty to finish Nate’s mega motor Goblin)... If you need anything shoot me a message and I’ll see if I have it...
THX,
Bruce
 

BAR-AIR

Well-Known Member
Good Morning,
The injectors are the stock (OEM) 2.2 Ecotec one. Just the one I removed when I installed the supercharger.
 

BAR-AIR

Well-Known Member
Good Afternoon,
Just working through the wiring harnesses...

(1) Complete supercharged Cobalt chassis wiring harness...
B9573976-61A9-4952-95C6-E4BCD00546AE.jpeg

0AF0B491-B53A-4D18-81DF-A956284F0208.jpeg


(2) 2008 Cobalt Engine harness (automatic transmission all labeled)...
BCFC4B4C-7C61-40C8-8C46-0577F9252525.jpeg


(3) “BLUE”s initial wiring harness (was in the process of removing the transmission portion -when the car was sold- SO thinned engine harness and chassis (call it parts harness)...
220D7391-9EC5-4715-A1A5-5482F30A1E7B.jpeg

4DA55798-0DB1-47E8-9433-E4F1620A5666.jpeg


(4) Ariel Atom supercharged Ecotec chassis harness...
99176031-7781-4A76-B151-29B3BED228A6.jpeg

C2179440-2B1E-4438-81D0-096C0B10CA0A.jpeg


(5) Complete 2007 Cobalt harness set (all labeled) will include BCM,ECM,TCM and main fuse block...
4409B4EB-EBE2-493D-9530-215ECB0FA960.jpeg

52E02A3A-E923-45BF-A005-8901D469B8B3.jpeg


THX,
Bruce
 

BAR-AIR

Well-Known Member
Good Evening,
Last of the bigger items...

(1) Fiberglass Lotus 7 nose cone...
A2B0D921-A227-43B6-8BDA-B93C4101979A.jpeg

39793D25-8884-4A6E-8757-E136380B8C8C.jpeg


(2) Large fiberglass air intake was going to cut up and use for side intakes...
EE377E16-A0D8-455A-AA96-3FEDBF643A68.jpeg

6319DCF5-4C85-4A10-9413-E7ED9D5E5387.jpeg


(3) Main fuse block housings...
0251041D-0598-407E-A9CD-D44D72B88112.jpeg


(4) Misc. fuse blocks...
C01D8F86-5D97-47B5-91F4-41FFA93E469C.jpeg


THX,
Bruce

A lot of parts listed above through out this thread... I have a lot that I have not listed...

[email protected]
 

BAR-AIR

Well-Known Member
Good Morning,
Would like to get $500 or BO (they are like new and have the universal side mount flanges also).
THX,
Bruce
 

Ark :D

Goblin Guru
Bruce,

Do you happen to have any SS gauge clusters? Don't know if there's a difference between early- and late-model. The plastic is cracked on mine and the "chrome" edges around the gauges are a little uglied up.
 

Peregrinus

Well-Known Member
How much are u wanting for a Supercharged harness? My local guy who's supposed to get me one keep leaving town. Also how much for the parts harness? I would be interested just for the plugs. I'm working on making a full harness from scratch. Lmk!
 
Top