Peregrinus
Well-Known Member
No sir, mine was literally just the absence of the two clutch sensor wires, once I added them to my plugs it was good to go. I've been following your issue in your thread, hopefully you figure it out.I disabled VATS in HP Tuners, and my car sometimes won't crank when requested... Wierd that it will let the engine run, but not let it start.
I took the electrical ignition switch apart, but it was in good shape. I hear the BCM relay click, so I know that it noticed the key in the start position.
I'm still thinking my issue is a GM Lan communication issue, as I have the guages sometimes die in my car. Not sue if Peregrinus has the exact same issue, but there is a lot of similarities.