**Post Picture's of your Finished Goblin Here**

G Atsma

Goblin Guru
AC-130 ---- One of the most effective weapon systems ever devised. Watching video of one performing its "duties" is awe inspiring!
 

LLBenJ

Active Member
What color powder coat is the chassis?

I really want to have my wheels coated that color!!!
I used Prismatic Powders Highland Bronze powder coating.

I actually ordered my wheels first and I found those in the color I was shooting for. The highland bronze was a close match, wasn't too "gold looking" in natural light, and off sets the white carbon fiber wrap well.

Wheels - https://www.summitracing.com/parts/MGW-14778042638?seid=srese1&gclid=CjwKCAjw38SoBhB6EiwA8EQVLrEFT60CyJZGQv6D4Ce2ULUAhYexIZo1C1Vpn9b4cfdyuVKR2NoVPhoCay0QAvD_BwE

Powder coating - https://www.prismaticpowders.com/shop/powder-coating-colors/PMB-5860/highland-bronze?gclid=CjwKCAjw38SoBhB6EiwA8EQVLkonh4bj713zEmn4_7dIMQsVoTaEDfdCP76YOedUwxUtJziSncpH4BoCISYQAvD_BwE
 
Last edited:

Dominicnicklyn

Active Member
I used Prismatic Powders Highland Bronze powder coating.

I actually ordered my wheels first and I found those in the color I was shooting for. The highland bronze was a close match, wasn't too "gold looking" in natural light, and off sets the white carbon fiber wrap well.

Wheels - https://www.summitracing.com/parts/MGW-14778042638?seid=srese1&gclid=CjwKCAjw38SoBhB6EiwA8EQVLrEFT60CyJZGQv6D4Ce2ULUAhYexIZo1C1Vpn9b4cfdyuVKR2NoVPhoCay0QAvD_BwE

Powder coating - https://www.prismaticpowders.com/shop/powder-coating-colors/PMB-5860/highland-bronze?gclid=CjwKCAjw38SoBhB6EiwA8EQVLkonh4bj713zEmn4_7dIMQsVoTaEDfdCP76YOedUwxUtJziSncpH4BoCISYQAvD_BwE
Good man, thx
 

Parson Green

Well-Known Member
Here's Lucy ....

(Lucy's donor had 87K odometer miles and zero aftermarket mods. The LSJ engine passed its compression test with flying colors and uses no oil. Factory tune runs good. The Pirelli 160mph-rated tires came on the donor. Cheers, regards, etc., PG)

Here's the Lucy after whom the car was named: https://peanuts.fandom.com/wiki/Football_gag

Most frustrating part of the build: getting the clutch bled. Most satisfying: When it started on the first crank.
 

Attachments

Last edited:
Top