Does anyone have any guidance on how to remove the donor front wheel hubs from the knuckles? Mine are seized tight, and I am trying to replace the bearings.
I tried a punch and hammer on the back side, but it just deformed the bearing carrier. They have been soaked in penetrating oil, with no improvement. I considered a puller, but there isn't anything in the center to press against. Just a hole.
My next step is heat, but I thought I'd ask first.
I tried a punch and hammer on the back side, but it just deformed the bearing carrier. They have been soaked in penetrating oil, with no improvement. I considered a puller, but there isn't anything in the center to press against. Just a hole.
My next step is heat, but I thought I'd ask first.
Attachments
-
236.6 KB Views: 193
-
234 KB Views: 211