Solid Shifter OFFICIAL GROUP BUY

SACTX

Well-Known Member
UPDATED 1/28 with final pricing.

Ok everyone. It's time to get this going.

Original thread : https://dfkitcar.com/forum/index.php?threads/aftermarket-solid-shifter.1382/

A full set up ready to install is $317.00 with reversers, $265.00 without.
A full set up when you modify the shifter yourself is $297.00.
A base plate is $60.00
Hardware sets are below.
Shipping is not included in pricing.
No sales taxes.

Shifter Options:
1. Supply your own from HERE and cut down per THIS post
2. Get more people together and group order from that same guy.
3. Get it from me. I'm still confirming the lead time from China. Supplied from me is $115.00. Cutdown and ready to install is $135.00

Baseplate:
The base plates are going to end up being $60 each. They'll be shipped from me with the hardware sets as the extra shipping of each individual one from TheNuker would have cost everyone more money. 3/4" thick 6016-T651 Aluminum - Mill finish. No finish, no edgework or clean up, etc. You do what you want with it.

Hardware:
1. Shifter hardware including all hardware and all-thread to attach shifter to the plate, plate to the car, and connect linkages to the DF supplied ball ends. Everything in THIS post plus the extended bolts to bolt the plate to the car EXCEPT THE SHIFT KNOB (get your own to your taste). I'll have the all-thread cut to smaller, but still oversize, lengths to cut down on shipping as well.
$70.00

2. Cable reverser hardware to replace the DF supplied ball linkages. Includes stainless rod ends, screws, and adapters.
$68.00

3. Both shifter hardware and cable reverser hardware AT THE SAME TIME
$122.00

Payment will be to me. Zelle or Paypal are best for me. I can take credit cards through Square but there will be a fee from my business.

Please confirm your order and place in line by replying to this thread. Payment will not be due until your order is ready to ship. I'll confirm through messaging for shipping costs, addresses, payments, etc.

Plan on deliveries to start between 2/23 and 2/28. All of them should be able to be shipped by the end of February.

PLEASE ONLY RESPOND WITH ORDERS OR REQUESTS FOR NOW to keep this thread as clean as possible. Any conversations can be in the other thread.

Order List as of 2/10. Orders will be confirmed before shipping:
TheNuker - Base and hardware sets
Cheddar - Full set
Peregrinus - Base and hardware sets
Fozda - Base
Justin - Full Set
Dastrups - Base and hardware sets
Lando 217 - Base and hardware sets
Sparvy - Base and hardware sets
Vwsaabvt - Full Set
Towerdog - Base and hardware sets
Gtstorey - Base and pivot set
PaulPerger - Full Set
AzMoto - Base and hardware sets
Jirwin - Full Set
OptimizePrime - Full Set
djclueless - Full Set
JERMzSS - Base and hardware sets
benjy - Full Set
WYGoblin - Base and hardware sets
ATMironov - Base and hardware sets
CodyP - Full Set
TheDon - Full Set
Ark :D - Full Set
SmsDetroil - Full Set
Comegetjoe - Full Set
Meansol - Full Set
G-Quest - Full Set
Dylan Stan - Full Set
Zklonne - Full Set
baustin - Full Set
Brett- Full Set
ncgoblin - Full Set
RouteAble -Full Set
Ccgillett - Full Set
mrgrusni - Full Set
AleX1/9 - Full Set
2.0 Turbo - Full Set
MR.812 - Full Set
R3drckt - Full Set
Phaetonman7 - Full Set
 
Last edited:

Cheddar

Member
I Want to pay for everything so It's as bolt in as possible without me modding much. Just tell me where to send my money and how much! So I'm assuming I will still need to purchase the shifter assembly online???
 

Peregrinus

Well-Known Member
I will take baseplate and all hardware, assuming it's all working properly. I have the shifter itself.

Baseplate
And Hardware #3 all parts together
 

Justin

Active Member
I will take baseplate and all hardware, if you figure out a price for the shifter and you to modify it I will take that too, if not I will purchase my own shifter.
 

dastrups

Well-Known Member
Ok everyone. It's time to get this going.

Original thread : https://dfkitcar.com/forum/index.php?threads/aftermarket-solid-shifter.1382/

I've put together as much as I can and will have more coming in the next day or two. We've got a pretty good idea of costs and such. Below is a list of what I've worked out.

Shifter Options:
1. Supply your own from HERE and cut down per THIS post
2. Get more people together and group order from that same guy. Better pricing for all and maybe as cheap as below......
3. Confirming lead time now (lead time could be long). Modify yourself as above, or I'll work up a quote to cut it down for you. If this is a go and enough people want them this way, I'll be fronting the money and let everyone know what the overall price will be. Expect it to be in the $110 to $115.

My suggestion is #2 since we know 100% for sure that this shifter works with this base. The one that I'd order may not match 100% and cause issues. They look that same but you know how that goes.....

Baseplate:
Still confirming pricing but it looks like they'll be in the $50-$55 range but they could be up to $60. 3/4" thick 6016-T651 Aluminum - Mill finish. No finish, no edgework or clean up, etc. You do what you want with it.

Hardware:
1. Shifter hardware including all hardware and all-thread to attach shifter to the plate, plate to the car, and connect linkages to the DF supplied ball ends. Everything in THIS post plus the extended bolts to bolt the plate to the car EXCEPT THE SHIFT KNOB (get your own to your taste). I'll have the all-thread cut to smaller, but still oversize, lengths to cut down on shipping as well.
$70.25

2. Cable reverser hardware to replace the DF supplied ball linkages. Includes stainless rod ends, screws, and adapters. TO BE CONFIRMED THAT IT FUNCTIONS CORRECTLY.....but it should. It should be installed before this weekend. I'll post another video when I install it and test it.
$67.60

3. Both shifter hardware and cable reverser hardware AT THE SAME TIME
$122.45

None of these prices include shipping and the baseplates may ship separately from the hardware.

Payment will be to me. Zelle or Paypal are best for me. I can take credit cards through Square but there will be a fee from my business.

Please confirm your order and place in line by replying to this thread. Payment will not be due for at least a few weeks. I'll confirm through messaging for shipping costs, addresses, payments, etc.

PLEASE ONLY RESPOND WITH ORDERS OR REQUESTS FOR NOW to keep this thread as clean as possible. Any conversations can be in the other thread.
I would like the baseplate and all the hardware for both shifter and reverser. I have the actual shifter already. Thank you!
 

Sparvy

Active Member
Ok everyone. It's time to get this going.

Original thread : https://dfkitcar.com/forum/index.php?threads/aftermarket-solid-shifter.1382/

I've put together as much as I can and will have more coming in the next day or two. We've got a pretty good idea of costs and such. Below is a list of what I've worked out.

Shifter Options:
1. Supply your own from HERE and cut down per THIS post
2. Get more people together and group order from that same guy. Better pricing for all and maybe as cheap as below......
3. Confirming lead time now (lead time could be long). Modify yourself as above, or I'll work up a quote to cut it down for you. If this is a go and enough people want them this way, I'll be fronting the money and let everyone know what the overall price will be. Expect it to be in the $110 to $115.

My suggestion is #2 since we know 100% for sure that this shifter works with this base. The one that I'd order may not match 100% and cause issues. They look that same but you know how that goes.....

Baseplate:
Still confirming pricing but it looks like they'll be in the $50-$55 range but they could be up to $60. 3/4" thick 6016-T651 Aluminum - Mill finish. No finish, no edgework or clean up, etc. You do what you want with it.

Hardware:
1. Shifter hardware including all hardware and all-thread to attach shifter to the plate, plate to the car, and connect linkages to the DF supplied ball ends. Everything in THIS post plus the extended bolts to bolt the plate to the car EXCEPT THE SHIFT KNOB (get your own to your taste). I'll have the all-thread cut to smaller, but still oversize, lengths to cut down on shipping as well.
$70.25

2. Cable reverser hardware to replace the DF supplied ball linkages. Includes stainless rod ends, screws, and adapters. TO BE CONFIRMED THAT IT FUNCTIONS CORRECTLY.....but it should. It should be installed before this weekend. I'll post another video when I install it and test it.
$67.60

3. Both shifter hardware and cable reverser hardware AT THE SAME TIME
$122.45

None of these prices include shipping and the baseplates may ship separately from the hardware.

Payment will be to me. Zelle or Paypal are best for me. I can take credit cards through Square but there will be a fee from my business.

Please confirm your order and place in line by replying to this thread. Payment will not be due for at least a few weeks. I'll confirm through messaging for shipping costs, addresses, payments, etc.

PLEASE ONLY RESPOND WITH ORDERS OR REQUESTS FOR NOW to keep this thread as clean as possible. Any conversations can be in the other thread.
Sign me up for the baseplate and all of the hardware (I've already got the shifter). This is a great addition and really appreciate all of the effort your putting into this.
 

CodyP

Well-Known Member
I have been following and will be wanting one of these complete setups as well. I'm still a ways out though as I have not yet purchased my kit.
 

PaulPerger

Well-Known Member
Shifter, all hardware and baseplate please!!
Just let me know how much to send and where to send it!!
And I would be good the extra cost to have the shifter cut by someone with the proper tools... I will hack it with a grinder if necessary, but will gladly pay a little extra to have it pre-cut.

And Thank You!!

20256
 

TheDon

Well-Known Member
My kit is ordered, so no hurry but I'll take a complete set up looks awsome in car compared to the factory plastic. Great job getting it all together.
 

jirwin

Goblin Guru
From your other thread...

I think everyone that has on offer in on the shifter should withdraw the offer or let it expire. I think if we get everyone together, we can get better pricing from the seller or get them straight from China.

We should have the pricing for the base worked out in a day or two and I've found a separate supplier for the rod ends and ball joint linkages that cut a lot of the cost for those items out, if they're bought in bulk. Just hold for a day or two and it'll make it better for everyone. I think I can save everyone a lot of money on this thing if we all work together.
So, if I want to buy your "kit" I shouldn't be buying the shifter you linked above? I should be waiting?
 

SACTX

Well-Known Member
From your other thread...



So, if I want to buy your "kit" I shouldn't be buying the shifter you linked above? I should be waiting?
The idea behind that was that everybody is putting in offers on the same thing creating high demand and making it less likely for them to discount pricing for anybody. They might even raise the price.

I just put in an order for some shifters from the supplier in China. They will be shipping this week, hopefully. The people who have told me that they want one and want it cut will be able to get one from me for a competitive price to what they could have gotten it there, but have it already cut down and ready to go. I am still finalizing the price but it’ll be good.

If you feel better buying one now and modifying it on your own, I suggest getting with a few people and putting in an offer for multiple pieces after all of the other competing offers have expired. That seller will be more likely to take that offer.

Thank you!
 

jirwin

Goblin Guru
The idea behind that was that everybody is putting in offers on the same thing creating high demand and making it less likely for them to discount pricing for anybody. They might even raise the price.

I just put in an order for some shifters from the supplier in China. They will be shipping this week, hopefully. The people who have told me that they want one and want it cut will be able to get one from me for a competitive price to what they could have gotten it there, but have it already cut down and ready to go. I am still finalizing the price but it’ll be good.

If you feel better buying one now and modifying it on your own, I suggest getting with a few people and putting in an offer for multiple pieces after all of the other competing offers have expired. That seller will be more likely to take that offer.

Thank you!
If you just ordered then did I miss the boat? I would like the whole kit, shifter included, if possible. Thank you
 
Top