Sub frame mount

[ole mother]

Can someone tell me why, the kit comes with carriage bolts? Neither side of the sub-frame has a spot for the head of the bolt to fit into. What am I missing?

 

[95Blitz]

it's so the radiator hose will have something smooth to rub on. Click the pic on post 89.

Coolant hose alternative

Ross, I see it now in your previous post.

dfkitcar.com

 

[Towerdog]

I ground the square to a round and put a flat on each side for a wrench to get it flush w the subframe.

 

[95Blitz]

I ground the square to a round and put a flat on each side for a wrench to get it flush w the subframe.

Yes sir great idea....

 

[Desert Sasqwatch]

I ground the square to a round and put a flat on each side for a wrench to get it flush w the subframe.

How much torque were you able to achieve? If I recall the subframe bolts require quite a bit to ensure no movement of the subframe against the tube frame mounts.

 

[Towerdog]

How much torque were you able to achieve? If I recall the subframe bolts require quite a bit to ensure no movement of the subframe against the tube frame mounts.

To specs... They caint spin w a wrench on them.

 

[PyroGuy923]

I used a chisel to dent the subframe to give them something to bite into and then torqued them down.

 

[95Blitz]

I had to follow Towerdog's lead on this one. Once again great idea.

 

[ole mother]

smart