Tires and Wheels List Updated on 3/25/2020

Metal Mech

Well-Known Member
Chassis Number 398
Frame Type: Standard Track
Color: Prismatic Powders Custom creation 756, Mystic Purple Base, Chameleon Teal Topcoat
Donor Year / Engine: 2010 / 2.2 XFE Base Coupe
Engine / Trans: 2.2 LAP, ZZP LE5 Cams, Neutral Balance shafts, HHR Big runner intake, 3582r chinaboi, Saturn Vue 4.41 gearset F23 transmission
Wheel Make / Model: Konig Hypergram
Front Wheel - Size / Offset / Bolt Pattern: 17x9 / +45 / 4x100 (57.1x73.1mm Aluminum hub centric rings used)
Rear Wheel - Size / Offset / Bolt Pattern: 17x9 / +45 / 4x100 (57.1x73.1mm Aluminum hub centric rings used)
Spacer Dimension: 4x100 2" thick 57.1mm Hub/Lug Centric
Wheel Weight in lbs.: 38.3lbs
Tire Make / Model: Nitto NT 555 RII
Front Tire Size: 275/40R17
Rear Tire Size: 275/40R17
Seat Make / Model: Corbeau
Hey it’s the chassis right after mine. Your done already and I’m just starting haha.
 

Metal Mech

Well-Known Member
Im #383 and been driving it almost a year now LMAO, get it done! I know you had issues with the powder coat though.
Yeah still waiting on that to get back. I also needed a shed so I had room to work on the garage. Then winter came and the donor sits outside and I can’t work on the cold.
Making progress now though. Biggest hurtle at the moment is budget.
 

Metal Mech

Well-Known Member
Also since I totally got this thread off topic.

Kansai KNP 17x9.5 +12 in a 5x114.3 pattern
Haven’t gotten tires yet but going 255/40R17. Probably BFG.
Will be powder coated to match frame.
 

Metal Mech

Well-Known Member
I built mine in a car port in the middle of winter in Michigan. Get it done. Lol
Yeah no not happening. No car port. Open air drive way. I also didn’t have room in the garage for the parts I am stripping. I spent the winter cleaning up and organizing the garage. I plan to have the car completely stripped before winter so I can keep working in a comfortably warm garage.
 

BSinvestments

Active Member
Please make sticky at the top of this thread:

View attachment 12389

Updated list (3/25/2020) of chassis number, frame/color, donor year/engine, installed wheels, wheel weight, tires and seats on everyone's Goblins. I need help filling in the blanks. Please send me the following info and I'll add it to the list (or send corrections if needed):

Goblin Builder:
Chassis Number:
Frame Type / Color:
Donor Year / Engine:
Wheel Make / Model:
Front Wheel - Size / Offset / Bolt Pattern:
Rear Wheel - Size / Offset / Bolt Pattern:
Wheel Weight in lbs.:
Tire Make / Model:
Front Tire Size:
Rear Tire Size:
Seat Make / Model:

Click on list to make full screen and easier to read.

Thanks,
Jeff
If you would like to update Chasis #74
Goblin Builder: Credit to BaltimoreHokie, all though a lot has changed
Chassis Number: 74
Frame Type / Color: street
Donor Year / Engine: 07 LSJ-T
Wheel Make / Model: Vision 571 Sport Star II / MST MT11
Front Wheel - Size / Offset / Bolt Pattern: 15x10 5.5" / 16x8 +15
Rear Wheel - Size / Offset / Bolt Pattern: 15x10 5.5" / 16x8 +15
Wheel Weight in lbs.: 21lbs / 15lbs
Tire Make / Model: Nankang AR1 / Toyo R888R
Front Tire Size: 275/35-15 / 245/45-16
Rear Tire Size: 275/35-15 / 245/45-16
Seat Make / Model: Corbeau FX1

My street tire setup up is MST MT11 16x8 +15 backspace with 245/45r16 Toyo R888R
IMG_3763.jpeg


My new track setup is Vision 571 Sport Star II 15x10 5.5" backspace (571-5165B0) with Nankang AR1 275/35r15
42221
 

BSinvestments

Active Member
Love those track wheels! Why 15"s over the 17"s?
seemed to be the go to for the real fast guys here was the deciding factor, LOL. Also gear ratio, I wanted to tighten the ratio down with the 23" tall tires. I also liked the look of the smalled wider tires
 
Last edited:
Top