ZZP M62 Spacer plate

Rttoys

Goblin Guru
The stock gasket between blower and intake is copper or brass (Reusable). I would use that between blower and spacer, then theirs from spacer to intake.
Don’t really know anything about the spacer other than there’s ports for fun stuff.
 

jayrolls

Well-Known Member
The stock gasket between blower and intake is copper or brass (Reusable). I would use that between blower and spacer, then theirs from spacer to intake.
Don’t really know anything about the spacer other than there’s ports for fun stuff.
The way the mounting holes are drilled, there prong side has to go to the manifold. The mounting holes are bored to fit over the dows on the manifold. I’m leaning to using the oem gasket between the spacer and the charger.
 
Top