New profile posts

I'm just a few days away from first fire-up Getting JACKED! Just need to sort out a couple wires, check fluids, and cross fingers!
Hey there is a couple guys in boise that have goblins and I believe one in CDA.... you are able to license them in Idaho. I'm in cda area and have talked to the dot up here and he didn't think it would be a problem as long as it meets their requirements... ie windshield, wipers, head lights, tail lights etc.
LLBenJ
LLBenJ
I'm located in Kuna. Give me a shout if you decide to pull the trigger on the build.
J
Jordman1989
I roll raced a goblin on the highway past the idaho center last summer in my challenger and he gave me a heck of a run.... dark gray challenger.... was that you
Hey bud, would you mind sharing the dfx file for your wing uprights so I have something to start with? This confuses me
This is SAMSMOOTH Coeur d Alene Id Just getting started on my build. How did you get registered in Idaho? Did you have to get "Restricted" plates?
MADISONVILLE!? My Sister and family lived off of Morgan street, down that street from the Piggly Wiggly.(up until last year.) I'll be visiting with her March 3-9, over in Hammond. If you still have your Goblin I would like to see it then!
A
ah.b.normal
Do you happen to know any of the Garma's. My BIL Tony, His wife, my sister Thadria, Max, Luca and Isabel?
N
Northshoresaint
No, sorry I haven’t met them.
A
ah.b.normal
Just curious, Madisonville is not big like NO. We're staying at Sun Outdoors New Orleans Northshore. An RV park at I-12 and LA455, exit 47.
Contacting you directly to offer my help. I have disassembled 4 Cobalts in my research on my project and I have Misc parts hanging about my place. Any piece of a standard Cobalt I likely have lying around. I am in Columbus, GA, but even if you are far away I'll mail ya little stuff.
Just wondering if you are still working on your harness? is it still un-taped? I need to know where 2 wires on the purple 14 pin engine plug lead to.
Traé
Traé
its mostly unwrapped yes. What two wires are in question?
I’ll be home later this evening and can check it out to see if I can help.
D
Doug Rostad
Awesome!!! The 14 pin purple body to engine plug. Somewhere along the way I cut these out. I don't have any bare ends & I don't see any plugs where I may have cut them out of. Where do they lead to? If you are looking at the purple side of the plug and the clip is in top they are the two on the upper right of the plug. They look to be the tan an brown data wires. I'm trying to ad pictures
D
Doug Rostad
Ok , I tried to "attach" pictures but it didn't work.
Howdy! I commented on your post about misc small parts... I have been looking all over for the red cap that goes on the positive terminal of the fuse box... or the entire lid if that's one piece I suppose... didn't really look into how it attaches.

If you happen to find one I will gladly pay what you want for it plus shipping of course.

My address is 70 Trellis Ct Clayton NC 27520
A
ah.b.normal
Ok, I'll try to get that out to you this week.
I see you are in NC. Just wondering how hard it was to register the Goblin in NC? I recently tried to register a restomod falcon in Wilmington NC and it was a headache!
I happened to see a pic of the front end of your unit and it appears you have the old/unimproved steering arms. If so, DF will get you their upgraded units. Call Adam. The old style had a few failures in crashes.
Oh No! Are you my(latest) Dentist?! I broke a molar and had to get a crown, last March when I was in Prospect, near Crater Lake. Shady Cove Family Dentistry? I can never remember who I infect with my old car stories. That would be funny if we'd met. My brother is a dentist/ retired. He is in Jacksonville, N.C., so he is no help! WELL, No More Poppycock brand caramel popcorn for me!
ToothMagician
ToothMagician
That's very true, 'Funny thing is my dentist name is Dr. Spaulding.' I think his wife end up marrying the dentist at the end as well. Haha. I did a stint in the navy as well but as a Helicopter electrician. I have to give kudos to the naval dentists on the boats, it's another level when the ship is rocking back and forth. Hurricanes are a bummer for sure, but there's at least a decent warning
A
ah.b.normal
I can see Hanks lining that ice skate up to his tooth to strike it. My brother has the $ to buy his latest M5, I'm building a Mid-engine car out of 15 y/o junk inspired by the 1964 DeTomaso Vallelunga. My Life is great but virtually no garage time! I like to share the stuff I've learned about the Cobalt(I've disassembled several(6) in my car cadaver clinic) with Goblin builders. Please, just ask! I don't mind at all.
ToothMagician
ToothMagician
It's not a bad gig, for sure. I'm not out of that student debt yet, so no fancy new cars for me. Thanks for offering the help, I'm sure I'll need it at some point. Experience always trumps theory!
Hello, where in kansas is your goblin located? Is it street legal with a kansas title?

Thanks
  • Like
Reactions: Brayanv
B
Brayanv
Im in olathe ks. Street leagal and i have title on hand
Top