Recent content by Keckster

I have the supercharged exhaust muffler section if that is what you are looking for

You are supposed to multiply it by the 1.43

I’m sure there’s some sort of error in both the turn method and the DF method. My angle gauge doesn’t fit on the bolts where they measure from but getting it to sit perfectly in line with the car and vertically on just the bolts seems like it could be inconsistent. As for the 3d printed mounts...

That’s roughly 6.15 degrees of caster using the eq (|A| + |B|) *1.43 so long as one is positive camber and the other is negative you can just add them. If they are both positive or both negative you gotta take the difference

What camber measurements did you get at turn in and turn out? + and - signs are very important for your measurements

The adapter I made has a 5 degree angle in the model.

probably would scratch it a bit. My frame is already scratched up so it doesn't bother me a ton. I've cut radiator hose in half before when clamping stuff and that generally protects it

Cross post in the DIY front end alignment thread I have made adapters to use with diyfabshop's laser alignment system. My adapter uses a worm gear clamp and 3 1/4-20 rivnuts. Laser alignment system can be found on here on DIYFabShop's website.

Not to highjack mid thread but if anyone is looking to assemble the 3d printed laser alignment system by diyfabshop I have modeled and used an adapter to mount to the goblin cage utilizing a worm gear clamp. Utilizing this system I was able to get the car the most stable it has ever felt! STL...

Love the package scales idea! is the underside/body of the scales plastic or did you find a set that was fully metal? I used a set a while ago but the plastic body started to crack after a few uses and they lost their accuracy...

You still not allowed to autocross? You should come out to the SUSQ region event June 20 and hang out. I'll give you rides if you aren't allowed to race! https://www.motorsportreg.com/events/autocross-aint-noise-pollution-susq-ax5-6-harrisburg-farm-show-elmerton-246889

Those new racing tires? or do you street drive them?

Are you willing to share the custom DF frame files?

Like laser brackets for the top hoop? I was thinking about modifying his designs for that

The FM hub stands were decently accurate from what I could tell. It’s the same old garbage in garbage out type of situation. If you don’t use big washers on at least three lug nuts you could visually see them bending away from the hubs, another issue was making sure the ground you are aligning...