• We've upgraded and reskinned the forum. Notice something off? Email us at [email protected] and we'll fix it.

Search results

  1. A

    V1 GOTW - 4-5-24 #249 Andrew Parker

    Thanks
  2. A

    V1 SS/SC cooling mods

    I only have dyno numbers on e85 before cams. And that was 349 rwhp and 295 rwtq My buddy's on 93 with a tvs and 2.8 pulley. Stock cams made 297 rwhp
  3. A

    V1 SS/SC cooling mods

    Yea I was able to get mine for $1,400. Probably going to up the pulley to a 2.8 https://youtube.com/shorts/VIG8iWY1CNk?feature=share
  4. A

    V1 SS/SC cooling mods

    With the 2.6 WOT pull it will be in the 140s and will settle back down to around 110-115
  5. A

    V1 SS/SC cooling mods

    Secondary
  6. A

    V1 SS/SC cooling mods

    Thinking about adding a ice box to mine now I'm on a tvs with a 2.6 pulley have dual pass, intake spacer, ported head, stage 2 cams, neutral balance shafts e85 and 93 tune. I have the rear and front heat exchanger in loop and 2 IC pumps
  7. A

    Cruise control

    Any one have a problem like mine. My cruise control works but it will not hold a constant speed it fluctuates up and down. 06 ss/sc tvs and ls4 TB
  8. A

    V1 Custom Exhaust

    No 40352. 2.5in
  9. A

    V1 Custom Exhaust

    Mine quite a bit quieter than the df supplied exhaust.
  10. A

    V1 Custom Exhaust

    This is mine.
  11. A

    V1 All warped up

    For mine it would have cost roughly $800
  12. A

    V1 All warped up

  13. A

    V1 All warped up

    Both mostly comercial stuff now
  14. A

    V1 All warped up

    It's my family's business. And I made the design and sent it to him
  15. A

    V1 All warped up

    Local shop
  16. A

    V1 All warped up

    Only other thing I plan on doing for now is a canvas top.
  17. A

    North carolina indemnity bond

    This post is a year old. I did not need a bond
  18. A

    V1 Determining F35 in neutral

    The arm without the counter weight will not move in gear. In neutral it will move back and forth with some resistance
  19. A

    V1 P2128

    Found the problem APP 2 signal wire was showing 6v should be a maximum of 5.2v cut the wire at the pedal and at the pcm and ran new wire. Voltage is good now and code is gone
  20. A

    V1 P2128

    All wires check good at the ecm. Either the new pedal is bad or the ecm has gone bad
Back
Top