V1 .

[LLBenJ]

.

 

[escapepilot]

I think installing the harness after the tank would be doable if you can get the frame high enough to allow you room to work from underneath. I thought putting the engine and drivetrain in was close to the end but there is so much left to do. If you do continue on without the harness, you’ll still have plenty to do.

 

[Robinjo]

I think you could do everything besides the seats and firewall. You could even get those set up in the chassis and pull them back out.

 

[Lndshrk Steve]

I'm worried about trying to get the large connectors back through that channel with the two coolant lines for the SC running through there now, and fuel tank at the top, it might be too tight. I think I'll hold off on the fuel tank until I get the wiring back.

That sounds like a good idea. I was wondering about that myself. The wiring lays in real easy with the tank out.

 

[escapepilot]

It is definitely easier with the tank out. I was thinking you would have to start in the back and feed it forward. That one bcm connector is large but the others should be manageable.

 

[Jareth]

What day did you ship off your wiring harness to them?


.

 

[Jareth]

I sent mine in on September 12, and was told last week that maybe will get it end of January?

.

 

[Goblinfanclub1234]

work on the hood and side panels?

 

[comegetjoe]

Dang. Thats a long time to wait. I guess its worth it though, knowing that I didnt mess anything up along the way.