ZZP Ecotec shorty header is on sale right now for 85$!

[TheNuker]

Just grabbed one, Hurry up if you can only 50 available!

Nuker-

http://zzperformance.com/ecotec/ecotec-shorty-header.html

Website is running slow as heck so be patient.

 

[RichN]

It's REALLLLY slow. Took me 15 mins to check out.
I grabbed 1 too = 44 left
Thanks Nuker

 

[AleX1/9]

I think that's the closest I've come to waiting in line for a black friday bargain. My first order even timed out and I had to do it twice! For these deals though... worth it!

ZZP shorty header $85
ZZP dual pass intercooler endplate $82
Option B tank and install hardware $60
ZZP 1.0 LSJ PCM reflash $55

Also got the phenolic intake spacer/gasket and upgrade laminova O-rings for good measure

I think the website slowness probably kept me from getting the stage 2 kit, which wasn't on sale. Probably good to see how the intake temps go with my setup before cranking up the boost..

 

[PHerder]

Thanks for the heads up! Order one also! I don't see where the remaining qualities is listed?

Found it when I clicked on the link from my order email...

As of 9:51 PM CT, there are 18 left.

Paul

 

[TheNuker]

Yeah same here! I already have the Dual pass endplate installed, I was really hoping for a stage 3 kit sale also. If you guys did not see it looks like after today all day saturday will be "dealer" pricing I think like 10% off everything so things not on sale today you can grab.

Does anyone know if the stainless steel break line kit would be useful for the goblin? It's on sale for 79.99$ normal 120.

Nuker-

I think that's the closest I've come to waiting in line for a black friday bargain. My first order even timed out and I had to do it twice! For these deals though... worth it!

ZZP shorty header $85
ZZP dual pass intercooler endplate $82
Option B tank and install hardware $60
ZZP 1.0 LSJ PCM reflash $55

Also got the phenolic intake spacer/gasket and upgrade laminova O-rings for good measure

I think the website slowness probably kept me from getting the stage 2 kit, which wasn't on sale. Probably good to see how the intake temps go with my setup before cranking up the boost..

 

[JSATX]

I got one as well even though I plan to go turbo later. Figured someone here might want it when I switch so why not. Plus I really like that the O2 is on the header not the down pipe.

 

[DanPerryy]

The Chinese version on eBay is NOT great. I already got mine (from them ) as I recall it was $85 too.

 

[TheNuker]

Yeah, I was very happy to grab the ZZP shorty header for 85$!

Nuker-

 

[PHerder]

Mine showed up today! That was QUICK!!!

It is sitting on my donor (2008 LS) that is covered with dust. It is Dodge City and the dirt from the fields around here seem to blow into my shop.

 

[RichN]

Mine showed up today as well.
Assuming the EGR is no longer going to fit.

 

[JSATX]

Mine showed up today as well.
Assuming the EGR is no longer going to fit.

View attachment 572

Is that something related to your Cali emissions system?

 

[RichN]

Probably. Massachusetts has the same emissions requirements. Cars sold in the southern part of NH may have been traded with a dealer there.
If that is the case, now I can loose the air pump too.

 

[JSATX]

Recently when I was dealing with trying to get mine started I came across a bunch of info about the air pump and how it's required (on cars that had them) to start.

Don't have any experience with any of that just want to share what I've found. Maybe just Cut it all out and get a reflash?

Probably. Massachusetts has the same emissions requirements. Cars sold in the southern part of NH may have been traded with a dealer there.
If that is the case, now I can loose the air pump too.

 

[Lonny]

We removed the air pump from P1 with no problems.

I don't think he likes Cobalts. It is funny how he complained about how hard it was to change the oil filter, but it only took him about 10 seconds to get to the filter cap with one hand while shooting a video. lol

 

[RichN]

We removed the air pump from P1 with no problems.

Thanks, I'll remove mine tomorrow.
Having that out would have made installing the starter cable much easier.

 

[TheNuker]

Dang, Got my shorty headers today, but one of the tubes has a nice pretty deep dent...

Hopefully ZZP will send me a new one.

Nuker-

 

[PHerder]

Nope, that is there for clearance (if the dent is on the inside of the right tube!)

Otherwise... never mind!

Paul

 

[TheNuker]

Doh, I see the paper now. Man it looks so unnatural!

Nuker-

 

[AleX1/9]

Haven't gotten mine yet... does it come with gaskets?

 

[JSATX]

Haven't gotten mine yet... does it come with gaskets?

Nope