JSATX
Goblin Guru
Yeah I can’t swap the MaP that would really make everything go crazy.
I did confirm my map was working correctly. I’m getting 15psi with engine off and about 5 at idle which is all normal.
I’m running the 1.0 tune from ZZP for a 2.2L on low boost. Confirmed they tuned it for my map. Which if they didn’t I wouldn’t be getting realistic MAP values.
I’m now getting a “too lean” code. It’s sensing something and slamming shut at low rpm.
I did confirm my map was working correctly. I’m getting 15psi with engine off and about 5 at idle which is all normal.
I’m running the 1.0 tune from ZZP for a 2.2L on low boost. Confirmed they tuned it for my map. Which if they didn’t I wouldn’t be getting realistic MAP values.
I’m now getting a “too lean” code. It’s sensing something and slamming shut at low rpm.