71mm (2.8") SC Pulley - $OLD

[Robinjo]

71mm pulley that comes out to 2.8". It's the GM Stage style with only 4 bolts, but are torsion bit T30. It's missing one, came like that to me. This is a press on item. Asking $30 OBO plus shipping.

I do have the ZZP tool that I can send with the pulley as long as the tool gets returned once installed. I will ask for a 'tool rental fee' that will get returned once the tool is back.

 

[mike_sno]

I would be interested. I just measured my pulley. Not sure how to measure it and not sure if I have an original pulley on my LSJ. Did you measure in the valley of the rips?

See here, dont want to hijack your thread. http://dfkitcar.com/forum/index.php...009-cobalt-ls-with-135k-donor.4634/post-97591

 

[Robinjo]

I did it a few ways. Both need the belt off the pulley you are measuring.
1. I just measured the top of the ribs to get the diameter (peaks of the ribs). I have a cheap pair of calipers so this was easy. If you don’t have those use #2.
2. I placed a piece of tape on top of the ribs and around the whole pulley. Then cut that, pull it off and measure the length. Diameter is this length divided by Pi (3.142).

 

[Robinjo]

Sold.

 

[mike_sno]

Thanks

@Robinjo is an excellent seller and super easy to deal with. I would for sure buy again some from him.