Clutch position sensor issue. Need help

[Indy Lonnie]

I finally got my goblin out this year and have found a problem. It will start without the clutch pushed all the way in. This is new because on the first start - it wouldn’t until I remembered to push it in...
I decided to replace the sensor. ( I have not done the sensor learn.) The new switch is behaving just like the old. It will stop the cruise control and I can see the clutch depressing in HP Tuners.
The switch has 3 prongs. One ground, the second prong seems to be a rheostat for the first 1/4 of the sensors throw and the last prong seems to be a rheostat for the last 1/4 throw.
My questions - does anyone know how do I perform the clutch sensor learn in HP Tuners?
The second question, does anyone have the wiring diagram for the clutch position sensor. I have a 2009 SS.

Any suggestions and help would be appreciated.

 

[SmsDetroit]

I finally got my goblin out this year and have found a problem. It will start without the clutch pushed all the way in. This is new because on the first start - it wouldn’t until I remembered to push it in...
I decided to replace the sensor. ( I have not done the sensor learn.) The new switch is behaving just like the old. It will stop the cruise control and I can see the clutch depressing in HP Tuners.
The switch has 3 prongs. One ground, the second prong seems to be a rheostat for the first 1/4 of the sensors throw and the last prong seems to be a rheostat for the last 1/4 throw.
My questions - does anyone know how do I perform the clutch sensor learn in HP Tuners?
The second question, does anyone have the wiring diagram for the clutch position sensor. I have a 2009 SS.

Any suggestions and help would be appreciated.

Mayor west has all the wiring diagrams in his build log. I broke my switch and found out that you need a tech2 to do the relearn. So JB Weld it was to weld the arm back on.

 

[Brian74]

The VXdiag is around $100 on Amazon; it fully emulates a Tech2 and will allow you do do a clutch relearn. Its a pain in the ass to get set up but once its working, its great.