Seat Belt Bolt

[KingChuck24]

While disassembling the donor we ended up stripping two of the seatbelt bolts. Does anyone know exactly what they are? My googling has come out to be inconclusive. Link - This these are the bolts that I am talking about

 

[Rttoys]

T50OE

it’s a t50, but has blunt ends.

tool list

I searched for a tool list and have not found one, yet. I know that the majority of the tools needed are normal, standard sizes. But, there are some outliers that I have come across already like - 35mm socket for my axle nut, fuel line connector release tool, T50 Torx socket, etc. I know some...

www.dfkitcar.com

 

[KingChuck24]

T50OE

it’s a t50, but has blunt ends.

tool list

I searched for a tool list and have not found one, yet. I know that the majority of the tools needed are normal, standard sizes. But, there are some outliers that I have come across already like - 35mm socket for my axle nut, fuel line connector release tool, T50 Torx socket, etc. I know some...

www.dfkitcar.com

I am aware that it is a T50 head but I do not know the length or thread pitch of the bolt. I could be misunderstanding something, do you possibly have a link?

 

[Rttoys]

Ah. You want the bolts. Not sure, I would have to measure them. I think I still have them, but not sure. Will have to look tomorrow. I could send them to you if need be. I don’t need them.

 

[KingChuck24]

Ah. You want the bolts. Not sure, I would have to measure them. I think I still have them, but not sure. Will have to look tomorrow. I could send them to you if need be. I don’t need them.

Do I not need the seat belt bolts? I am using harnesses, for some reason I thought they were used elsewhere.

 

[Sluggonaut]

I didn't use/keep my seat belt bolts. Harnesses use different hardware.

 

[Rttoys]

Do I not need the seat belt bolts? I am using harnesses, for some reason I thought they were used elsewhere.

ah. No. If you are going with harnesses, you’ll need your own bolts/nuts.

 

[Robinjo]

ah. No. If you are going with harnesses, you’ll need your own bolts/nuts.

What if your using the stock belts? Do you still use the DF supplied hardware?

 

[Rttoys]

I believe so.