Search results

I’m looking to get 25,000.

Long Island NY

Thank you. I edited my post.

I am looking to sell my DF Goblin #297. Bought in March 2021, delivered in June 2021, completed in August 2021 and Titled and registered (Montana) in May 2022. I haven’t been on the forum in a while, so not sure what the demand is. Message me for any details or questions. Built with all new...

A few more pics

I am officially licensed and insured. Now the real fun begins. Thank you to everyone who helped me through this journey!!!

Long time no post. I am looking to start the registration process. I am going the Montana route. Is first step to obtain MCO or establish an LLC ?

Same here as well

I think I found the problem. I have to confirm tomorrow. I was wiring the switch according to the diagram, but the switches I’m using weren’t working. So i used the factory switches and figured out what each wire did when I pushed the buttons. Then I did same with my aftermarket switches. I have...

I have also tried to touch the dg/w wire to the grey wire with the 1270 resistor in series. And nothing happens on the cluster.

Thank you

I only have voltage when the cluster is plugged in. When cluster is unplugged, wire has nothing on it.

Can anyone confirm if they have any voltage on the Dark Green/White wire that goes from the cluster to the dash buttons? On my car, with the cluster plugged in, I have 10.3 Volts DC on the DG/W wire with key on engine off. Not sure if this is a short to power or if its correct.

Thank you for the reply. I am looking at the diagram provided by Lonny. I think i am doing the wiring correctly. I have 2 switches wired in parallel going to the dg/w and grey wires with the resistor on the grey wire on the switch. Are the switches supposed to be normally open or closed? I...

i used a snap on scanner

Good news, bad news, lol. I fixed the brake light problem. I had to calibrate the Brake Pedal Position Sensor. I am trying to wire up the buttons for the dash panel. My car does'nt have cruise, so i have only the Hazard, Info, and Enter button. I got the hazard button working. I cant seem...

Brake pedal position sensor is installed and connected. I will post some pics when I get home. It seems like something is commanding the brake lights on after I turn the key on. After I first turn key on, the brake lights come on. If i push and release brake pedal, the brake lights go off...

Just touching up my previous post. All lights are wired up. When using the turn signal, left or right, they work properly. When I shut off the turn signal, after a few seconds , the brake lights come on. Not sure if anyone else has come across this before.

Came across a weird electrical issue tonight. I have my headlights and tail lights wires up. Don’t have the mirrors/front turn signals wires yet. I noticed that if I use my turn signals one way and then the other way, the brake lights come on and stay on. I haven’t checked anything yet. Just...

Yes it does.