WA08TC
Well-Known Member
- WA08TC Well-Known Member
Would be willing to trade, looking into getting a JDM, old evo, skyline, supra, rx7 if anyone has connects.
Testing the waters on my built goblin. Have my eye on a new project that I can drive year round. I'm aware I won't get back what I have put into it so priced to reflect that. Hate to see her go ofcourse but being a tinkerer since she's done I like to keep busy.
Engine:
2.1L Built Gen 3 (sand cast) (Approx 700 miles)
Lnf crank
Wiseco 88mm pistons
ZZP 4340 rods
ZZP S2 cams w/fuel lobe
ZZP 82# valve springs
Dyemond fab intake
Davis Craig EWP150 electric water pump
PSR3576 .63 @ 28psi on E47
626whp/482tq
Fuel:
ZZP fuel filter
ZZP Upgraded HPFP
Opel injectors
Trans:
F23 (Approx 700 miles)
KY stage 3+ clutch
Quaife LSD
Anodized Black shifter from DF
Suspension/Wheels:
QA1 from and BC rear coilovers from DF
ZZP tubular LCA
17x8 VMS fronts 245/40/17
15x10 Jegs rears 275/50/15 MT Street R
Have 17x11 matching VMS for the rear
Have 2(15x8) Jegs and tires
Misc:
OBD2 Bluetooth to Lenovo tablet dash
Audi Nardo grey (actual paint) hood
Brake proportioning valve
48" 9LR front wing
74" battleaero rear wing
Have some leftover misc parts as well
Asking 35k OBO, have some wiggle room but well over in the build.
Testing the waters on my built goblin. Have my eye on a new project that I can drive year round. I'm aware I won't get back what I have put into it so priced to reflect that. Hate to see her go ofcourse but being a tinkerer since she's done I like to keep busy.
Engine:
2.1L Built Gen 3 (sand cast) (Approx 700 miles)
Lnf crank
Wiseco 88mm pistons
ZZP 4340 rods
ZZP S2 cams w/fuel lobe
ZZP 82# valve springs
Dyemond fab intake
Davis Craig EWP150 electric water pump
PSR3576 .63 @ 28psi on E47
626whp/482tq
Fuel:
ZZP fuel filter
ZZP Upgraded HPFP
Opel injectors
Trans:
F23 (Approx 700 miles)
KY stage 3+ clutch
Quaife LSD
Anodized Black shifter from DF
Suspension/Wheels:
QA1 from and BC rear coilovers from DF
ZZP tubular LCA
17x8 VMS fronts 245/40/17
15x10 Jegs rears 275/50/15 MT Street R
Have 17x11 matching VMS for the rear
Have 2(15x8) Jegs and tires
Misc:
OBD2 Bluetooth to Lenovo tablet dash
Audi Nardo grey (actual paint) hood
Brake proportioning valve
48" 9LR front wing
74" battleaero rear wing
Have some leftover misc parts as well
Asking 35k OBO, have some wiggle room but well over in the build.
Attachments
-
IMG_20260718_141447236_HDR_AE.jpg425.2 KB · Views: 17 -
IMG_20260718_141535127_HDR_AE.jpg500.6 KB · Views: 18 -
IMG_20261113_122602160_HDR_AE.jpg392.7 KB · Views: 19 -
IMG_20261113_122549937_HDR_AE.jpg393.8 KB · Views: 16 -
IMG_20261113_122622756_HDR_AE.jpg422.6 KB · Views: 17 -
IMG_20261113_122653069_AE.jpg293.7 KB · Views: 18 -
IMG_20261113_122710994_HDR_AE.jpg304.1 KB · Views: 20 -
IMG_20261113_122751251_HDR_AE.jpg282.6 KB · Views: 18 -
IMG_20261113_122728412_HDR_AE.jpg272.3 KB · Views: 18 -
IMG_20261113_132257312_AE.jpg179.3 KB · Views: 18
Last edited: