V1 Button Panel Early Model

[Sik2jz]

Does anyone have a photo of the back of their button panel set? Horn and Hazards work fine but no info/return.

 

[Vwsaabvt]

not a picture, but hopefully this early model wiring sheet helps

 

[r3drckt]

Are you sure you have the correct wires for your return/info? I remember in the wiring video to tie them together during thinning because there 2 other wires that were that color and are easily switched. You might need to rewatch the videos and trace out to be sure (check continuity on pins, etc.)

 

[Rauq]

Also check the continuity of the switches. I had a switch not really soldered.

 

[Sik2jz]

Are you sure you have the correct wires for your return/info? I remember in the wiring video to tie them together during thinning because there 2 other wires that were that color and are easily switched. You might need to rewatch the videos and trace out to be sure (check continuity on pins, etc.)

I have the DF wiring service so it’s labeled.