Correct Flange?

[Josh's09]

I am looking at getting an exhaust built for my goblin, but I am trying to figure out what is the correct flange to have it made. I/We think it is this one ( http://www.performanceautowerks.com...racing-lnfldklhu-k04-turbo-bolt-flange-p-2023 ) but we aren't sure. Wondering if someone can confirm. Thanks in advance!

 

[jirwin]

ZZP sells stainless flanges. Just got one myself. You can buy there, or use it to compare.

Exhaust Flanges

Exhaust Flanges, comes in 8 different options.

zzperformance.com

 

[Josh's09]

ZZP sells stainless flanges. Just got one myself. You can buy there, or use it to compare.

Exhaust Flanges

Exhaust Flanges, comes in 8 different options.

zzperformance.com

So looking at what they are offering, they seem to be more of a "universal" flange. I have noticed the bolts on mine are around 3 1/4" on top, and 4 3/8" on the bottom. The ones on ZZP seem to be pretty square, so, I'd have to mod these either way.

 

[jirwin]

To clarify, which side of the exhaust are you wanting to do? Pre(headers) or post(muffler) turbo?

 

[Josh's09]

To clarify, which side of the exhaust are you wanting to do? Pre(headers) or post(muffler) turbo?

Good question, post turbo.

 

[jirwin]

Yeah, I don't even see that on ZZP's page there. No 4 bolt LNF or similar. Weird considering they offer downpipes with that flange.

 

[jirwin]

The ones you originally posted seems to line up though

 

[Goblinfanclub1234]

if you want a flange that connects to the stock turbo O2 housing I made a CAD file for this one and had one cut for myself. couldn't find it anywhere.

 

[Josh's09]

if you want a flange that connects to the stock turbo O2 housing I made a CAD file for this one and had one cut for myself. couldn't find it anywhere.

View attachment 42248

(Sorry for the questions, I'm a noob) This flange directly slides on to the stock turbo exhaust for an 09 cobalt SS/TC?

Is this different then the link I left above? Also, could you please send me the file?

 

[Fozda]

I am looking at getting an exhaust built for my goblin, but I am trying to figure out what is the correct flange to have it made. I/We think it is this one ( http://www.performanceautowerks.com...racing-lnfldklhu-k04-turbo-bolt-flange-p-2023 ) but we aren't sure. Wondering if someone can confirm. Thanks in advance!

This is the flange I used to build the exhaust for my turbo. It was the only one I could find.

 

[Josh's09]

This is the flange I used to build the exhaust for my turbo. It was the only one I could find.

Awesome! did you have to do any modification for this to work?

 

[Sluggonaut]

Does that mount to the turbo (A) or the O2 housing after the turbo (B)?

 

[Josh's09]

Does that mount to the turbo (A) or the O2 housing after the turbo (B)?

View attachment 42249

To spot A

 

[Fozda]

I don't believe anything would have to be modified to clear this exhaust setup.

 

[Scott #321]

These weren't available when I made mine or I didn't see them. Milled mine out and cut a groove to accept a Cobalt exhaust seal.

http://dfkitcar.com/forum/index.php?threads/scotts-extended-low-entry-track-321-09-ss-tc.2715/post-60105

 

[KSLunsfo]

I don't believe anything would have to be modified to clear this exhaust setup.
View attachment 42253View attachment 42254

Tell me about that "PERM" sticker on that Montana Plate... lol.

 

[Fozda]

Tell me about that "PERM" sticker on that Montana Plate... lol.

It's titled as a 1957 Lotus 7 so it's a one time fee for plates since it's so old.

 

[Goblinfanclub1234]

Tell me about that "PERM" sticker on that Montana Plate... lol.

I tried to get permanent tags from Montana for my Goblin but the broker wouldn't do it. I think it has to do with the age of the vehicle because they gave me permanent tags on my 1988 Nissan Sentra project.

 

[Goblinfanclub1234]

here is a drawing for the O2 housing flange. cost me over $100 to have sendcutsend make it out of 304SS

i had spinal fusion surgery
about to start a new job next week
i will finally be able to buy a TIG, teach myself how, and finish building my dual sportbike goblin exhaust

 

[neodied]

here is a drawing for the O2 housing flange. cost me over $100 to have sendcutsend make it out of 304SS

Cool site! I knew things like this had to exist on the internet but hadn't searched too hard. Looks like they do bending and forming too, so maybe this will be the place that makes some custom lower+forward seat brackets for me.