Davidljones88
Well-Known Member
- Davidljones88 Well-Known Member
Does the engine cover fit without cutting it? Going over a turbo. Also, I assume the spoiler must come off. As it sits, it seems impossible to install otherwise.
-
We've upgraded and reskinned the forum. Notice something off? Email us at [email protected] and we'll fix it.
Engine Cover
KSLunsfo
Well-Known Member
- KSLunsfo Well-Known Member
I still have not installed mine, so can't speak but so much to it.
If you're running the DF provided water to air intercooler, then I know the cover has to essentially be cut in half with an opening to clear the intercooler itself and the turbo side IC piping leading to it. There are at least a couple write ups on it here on the forum I believe, although they may be buried in build threads.
The wing would just be how much you want to work around it. But in my opinion you'll spend more time test fitting the cover over and over than it will take to remove and reinstall the wing.
If you're running the DF provided water to air intercooler, then I know the cover has to essentially be cut in half with an opening to clear the intercooler itself and the turbo side IC piping leading to it. There are at least a couple write ups on it here on the forum I believe, although they may be buried in build threads.
The wing would just be how much you want to work around it. But in my opinion you'll spend more time test fitting the cover over and over than it will take to remove and reinstall the wing.
SmsDetroit
Goblin Guru
- SmsDetroit Goblin Guru
It does need to be cut.
Similar threads
