ISO - LNF Fuse Block Holder

[ATMironov]

Anyone have a spare Fuse Block Holder for an LNF? One of my mounting tabs is broken.

 

[Gtstorey]

Mine only had one tab left. I used threaded rod through some of the plastic that sticks out with a strap across the top with wing nuts to hold it down.

I think you should be able to swap the fuse holder/circuit board into a standard Cobalt fuse box but I haven’t had them in my hands to compare.
They are also available new for a somewhat reasonable price.

 

[ATMironov]

Mine only had one tab left. I used threaded rod through some of the plastic that sticks out with a strap across the top with wing nuts to hold it down.

I think you should be able to swap the fuse holder/circuit board into a standard Cobalt fuse box but I haven’t had them in my hands to compare.
They are also available new for a somewhat reasonable price.

I couldn't find it new.. do you have a link?

Thanks!

 

[Gtstorey]

Sorry, I was thinking of GM part# 20814892 but it doesn’t show as coming with the lower portion. Can you find the GM part number on your base?

 

[Gtstorey]

A little more digging turned up GM 25974391 and not available.

 

[Desert Sasqwatch]

The local boneyard may have a Cobalt. Get the fusebox for a few bucks and see if the guts can be swapped? Assuming they don't have the same model Cobalt. Other builders may benefit from your experience.

 

[Gtstorey]

The ones I see on eBay look very close to the SS holders.

 

[ATMironov]

The ones I see on eBay look very close to the SS holders.

GM Part Number: 15899326 is available for the 2005-2010 all models but the Turbo SS.... I wonder how different it is...

 

[Ark :D]

The ECM is shaped completely different in the turbo, it's larger.