Throw out bearing

[Zoom Zoom]

Good morning, Can someone tell me where to purchase the 3 throw out bearing bolts, I stripped head on one ,and lost one, I don’t want to try and order some and come in wrong. I spent 20 dollars on a turbo gasket from ZZP yesterday. I was texting back and forth and told the guy I needed gasket between turbo and down pipe and he shows me a picture of one and I tell him that doesn’t look right then he says all the turbos take that same gasket. So against my better judgement I ordered it and while I was putting my wire harness on engine I look at the turbo and see the gasket he is talking about is the turbo to engine gasket. So now I have that wrong part coming and don’t need it. So if someone can point in in the right direction for the turbo to down pipe gasket I would greatly appreciate the help.. I’m probably calling it the wrong name anyway. The gasket with the 4 new bolts on it.
I know I need help on 2 different thing’s
Thank all of you guy‘s for all the help , I really appreciate it very MUCH !!!

 

[WYGoblin]

I went to napa for that gasket but they got it through a gm dealer. They could not find it in their system. I am not home right now or I would get you the part number.

 

[TheNuker]

I remember finding 3 10.9 bolts for the throw out bearing at the local nuts and bolts store.

Nuker-

 

[Zoom Zoom]

I went to napa for that gasket but they got it through a gm dealer. They could not find it in their system. I am not home right now or I would get you the part number.

Thank you

 

[Zoom Zoom]

I remember finding 3 10.9 bolts for the throw out bearing at the local nuts and bolts store.

Nuker-

Thank you at least I know what size they are

 

[TheNuker]

Thank you at least I know what size they are

No 10.9 is the bolt rating not the size! If I recall they are M6x1 and around 20-25mm long.

Nuker-

 

[Zoom Zoom]

Shows what I know about bolts

 

[OptimizePrime]

@Zoom Zoom Please confirm if M6x1 and the length (20 or 25mm) if you could - I'll be going through this shortly also

 

[WYGoblin]

This is the gasket I got from gm

 

[Zoom Zoom]

This is the gasket I got from gm View attachment 13040View attachment 13041

Thank you , The wife and I was just talking about you

 

[WYGoblin]

Thank you , The wife and I was just talking about you

Hopefully it was all good lol.

 

[Zoom Zoom]

@Zoom Zoom Please confirm if M6x1 and the length (20 or 25mm) if you could - I'll be going through this shortly also

I haven’t forgot about you. My bolts should be here tomorrow. I ordered both 20, 25 but I went with Allen wrench heads to getter a better grip

@Zoom Zoom Please confirm if M6x1 and the length (20 or 25mm) if you could - I'll be going through this shortly also

I haven’t forgot about you, My bolt’s should be here tomorrow

 

[Zoom Zoom]

@Zoom Zoom Please confirm if M6x1 and the length (20 or 25mm) if you could - I'll be going through this shortly also

I haven’t forgot about you. My bolts should be here tomorrow. I ordered both 20, 25 but I went with Allen wrench heads to getter a better grip

@Zoom Zoom Please confirm if M6x1 and the length (20 or 25mm) if you could - I'll be going through this shortly also

I got these from the bolts

 

[OptimizePrime]

Thank you brotha!

 

[DCMoney]

Please don't use those bolts. 18-8 stainless has a yield strength 70KSI, 10.9 has a yield strength of 140KSI.

McMaster has options if you still want an allen head, but with the 10.9 grade rating.

25mm length https://www.mcmaster.com/97050a307

 

[Zoom Zoom]

Please don't use those bolts. 18-8 stainless has a yield strength 70KSI, 10.9 has a yield strength of 140KSI.

McMaster has options if you still want an allen head, but with the 10.9 grade rating.

25mm length https://www.mcmaster.com/97050a307

Thank you I ordered your recommendation

 

[TheNuker]

Ace hardware/nuts and bolts Menards even a lot of lowes and home depot carry 10.9 metric. You should be able to find them locally.

Nuker-

 

[RouteAbel]

Auto supply stores carry them as well but might be a bit more pricey.