• We've upgraded and reskinned the forum. Notice something off? Email us at [email protected] and we'll fix it.

WTB: Siemens 60# injectors

Mirage775
These?

I don't think they're all the same as the Ecotec...? Those are super short..., I sent that pic to it to ZZP a few weeks ago and they said they needed to look like this:
51767


I wonder if the Saab ones will work? They look identical to the pic above?
51768
 
G
With all of the problems that come through the HPT forum, I would only buy injectors that come from a very trusted source, and only if the seller provides GM format data for an injector. Way to many counterfeits out there and correct Injector data is required for a decent tune. Injectors are not a place to gamble because it’s a good deal.
This is not pointed at DS’s link in particular but a general caution.
 
Mirage775
With all of the problems that come through the HPT forum, I would only buy injectors that come from a very trusted source, and only if the seller provides GM format data for an injector. Way to many counterfeits out there and correct Injector data is required for a decent tune. Injectors are not a place to gamble because it’s a good deal.
This is not pointed at DS’s link in particular but a general caution.

Agreed, Tim! I found the guy that's recommended by Lonny and Adam as a trusted source, Max Webster! I ordered some ZZP ones from him, but apparently the fine ole USPS has lost another package... He was shipping them to Josh Billheimer for testing and cleaning, but Josh hasn't gotten them and I'm unsure if Max is back in the hospital, as I haven't heard anything from him in a few days, plus no tracking number... Max sold me the majority of LSJ SC stuff, so he's a good guy on that end, but I'm having a terrible time finding these injectors.... ZZP said I could use 1050lb injectors though? They also said the 42lb injectors were not recommended for a SC 2.2 setup...
 
Desert Sasqwatch
Was looking for alternatives - wasn't sure which injectors are needed. Quantum Fuel Systems has been around for many years (20) and they may have the right ones. Was not trying to point to a fly-by-night seller, I understand the importance of having reliable and consistent fuel injectors. ;)
 
Mirage775
Was looking for alternatives - wasn't sure which injectors are needed. Quantum Fuel Systems has been around for many years (20) and they may have the right ones. Was not trying to point to a fly-by-night seller, I understand the importance of having reliable and consistent fuel injectors. ;)

I honestly don't know if the short one would work or not, but I found some longer nozzle ones and ZZP said they wouldn't work, so I would assume the shorties wouldn't??

I've used Quantum Fuel Systems several times over the years, so I know they're a legit company! I bought most of my Mustangs' fuel stuff from them last year!

I believe I've found some from a member here though :)
 
LLBenJ
The seating depth is very specific to the ecotec with the fuel rail bolting to the head and injectors tucking into the isolators. QFS has them in stock now. 2 x 2 sets of two required. Also make sure you're wiring harness is set up for both injector and car side (EV6 injector and EV6 harness).

 
Mirage775
The seating depth is very specific to the ecotec with the fuel rail bolting to the head and injectors tucking into the isolators. QFS has them in stock now. 2 x 2 sets of two required. Also make sure you're wiring harness is set up for both injector and car side (EV6 injector and EV6 harness).


I bought a barely used ZZP set from @Zacm829 a few minutes ago. I may get an extra set of the Quantum ones soon though? I guess Max isn't going to PM me back on FB.... I do have ZZP injector adapter harnesses as well, EV6 to EV1.
 
Back
Top