Turbo axles length (stock)

[KLMOTORSPORTS]

Does anyone know the stock length of the Turbo Axles (from back of hub to axle seal)? Thanks!!

Ken

 

[KLMOTORSPORTS]

Anyone have a set of Turbo axles laying around?

 

[RouteAbel]

I took pictures of mine which came from a ragged out 2010 turbo donor. Notice how one axle is about 1.5-2 inches longer than the other.

I have read that new axles are shorter because they un-compress. Mine may be different ages because my donor was wrecked and then repaired (poorly) and then wrecked a 2nd time. So maybe that explains the difference in length but you can see it in the boot that it is stretched out. The shorter one measures 24 5/8 inches.

The other one including the axle rod or transaxle or whatever that extra bar is called, measured 40 +1/2 inches.

Hope that helps.

 

[KLMOTORSPORTS]

Would you be able to compress both axles and measure from the points in the picture I attached (from the end that butts up against hub to end that butts up against transmission)...need measurement with axles compressed.

Really appreciate your help!!

 

[RouteAbel]

Measured as specified the shorter is 16 7/8 uncompressed but I can compress to 16 even.

The longer is 17 7/8 and I can only compress to 17 6/8.

 

[KLMOTORSPORTS]

Measured as specified the shorter is 16 7/8 uncompressed but I can compress to 16 even.

The longer is 17 7/8 and I can only compress to 17 6/8.

Awesome, thank you very much!