Longer wheel Studs.

[socaljeff3798]

I have had to add 8mm wheel spacer to clear the caliper does anyone have a source and part number for longer wheel studs?
I have Summit close buy so that would be helpful.
Thanks Jeff

 

[k.rollin]

These are what I used after replacing my steelies with alloy wheels so I could have a safe amount of thread engagement.

Wheel spacers

starxu was a dirty spammer trying to sell his own wheel spacers. So instead of sharing his link, how about we share a link to a competitor: https://motorsport-tech.com/

dfkitcar.com

 

[95Blitz]

ARP 100-7708 for the 2.5"
ARP 100-7713 for the 3.25"
And those are under head length numbers.

 

[Gtstorey]

Depending on what you are using now, this might be an option.

20 Black ET Spline Lug Nuts 12x1.5 For Toyota Lexus Camry Corolla Matrix tC | eBay

 

[Dsteinhorst]

You could step down to 10" brakes in the front to clear. I did and have had no problems.

 

[Joebob]

I ran into problems where my aftermarket wheels were thicker than my stock allow wheels and did not allow enough thread engagement to the studs. I was thinking about getting spacers to get a longer stud after the rotor but was educated in getting the extended length nuts as @Gtstorey mentioned. I ended up with these and they work great. Way easier and cheaper than pulling all new hub studs.

Joe

Gorilla ET lug nuts on Amazon